6.42
IDT70V26S/L
High-Speed 16K x 16 Dual-Port Static RAM Industrial and Commercial Temperature Ranges
5
Absolute Maximum Ratings
(1)
Maximum Operating Temperature
and Supply Voltage
(1)
Recommended DC Operating
Conditions
(2)
Capacitance
(1)
(TA = +25°C, f = 1.0MHz)
DC Electrical Characteristics Over the Operating
Temperature and Supply Voltage Range
(VDD = 3.3V ± 0.3V)
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in
the operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. V
TERM must not exceed VDD + 0.3V for more than 25% of the cycle time or 10ns
maximum, and is limited to
< 20mA for the period of VTERM > VDD + 0.3V.
3. Ambient Temperature Under Bias. No AC Conditions. Chip Deselected.
NOTES:
1. This is the parameter T
A. This is the "instant on" case temperature.
NOTES:
1. V
IL > -1.5V for pulse width less than 10ns.
2. V
TERM must not exceed VDD + 0.3V.
NOTES:
1. This parameter is determined by device characterization but is not production
tested.
2. 3dV represents the interpolated capacitance when the input and output signals
switch from 0V to 3V or from 3V to 0V.
NOTE:
1. At V
DD < 2.0V, input leakages are undefined.
Symbol Rating Commercial
& Industrial
Unit
V
TERM
(2)
Terminal Voltag e
with Respect to GND
-0.5 to +4.6 V
T
BIAS
Temperature Under Bias -55 to +125
o
C
T
STG
Storage Temperature -65 to +150
o
C
T
JN
Junction Temperature +150
o
C
I
OUT
DC Output Current 50 mA
2945 tbl 04
Grade Ambient Temperature GND V
DD
Commercial 0
O
C to +70
O
C0V3.3V
+
0.3
Industrial -40
O
C to +85
O
C0V3.3V
+
0.3
2945 tbl 05
Symbol Parameter Conditions
(2 )
Max. Unit
C
IN
Input Capacitance V
IN
= 3dV 9 pF
C
OUT
Output Capacitance V
OUT
= 3dV 10 pF
2945 tbl 07
Symbol Parameter Test Conditions
70V26S 70V26L
UnitMin. Max. Min. Max.
|I
LI
| Input Leakage Current
(1)
V
DD
= 3.6V, V
IN
= 0V t
o
V
DD
___
10
___
5µA
|I
LO
| Output Leakage Current
CE = V
IH
, V
OUT
= 0V t
o
V
DD
___
10
___
5µA
V
OL
Output Low Voltage I
OL
= +4mA
___
0.4
___
0.4 V
V
OH
Output High Voltage I
OH
= -4mA 2.4
___
2.4
___
V
2945 tbl 08
Symbol Parameter Min. Typ. Max. Unit
V
DD
Supply Voltage 3.0 3.3 3.6 V
V
SS
Ground 0 0 0 V
V
IH
Input High Voltage 2.0
____
V
DD
+ 0.3
(2)
V
V
IL
Input Low Voltage -0.3
(1)
____
0.8 V
2945 tbl 06