OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

3042

P1-P2
TB-9039 Page 1 of 2
© 2016 DESCO INDUSTRIES, INC.
Employee Owned
SCS - 926 JR Industrial Drive, Sanford, NC 27332 • (919) 718-0000 • Website: StaticControl.com
Grounding Accessories 3000 Series
Instruction Sheet
August 2016
USER GUIDE TB-9039
Your choice of four kits to meet
almost any grounding need
In any area where static-sensitive electronic components
or boards are handled, proper static protection is
essential. A variety of static control devices is available
to meet the requirements necessary to protect both the
electronics and the people handling them. But these
devices require proper grounding to perform their
functions. These four kits cover a variety of possible
uses, from single-point grounding to multiple points
connected to a common ground.
3048 Wrist Strap/Table Mat Grounding
System
Two wrist straps can be connected to the Wrist Strap/
Table Mat Grounding System. The 15 foot (4.6 m)
ground cord is connected directly to hard ground.
Snapping the Grounding System to either of the two
connectors in the corners of the table mat provides
reliable, common point grounding for the wrist straps and
the table mat simultaneously.
3047 Common Point Grounding
System
To provide true common point grounding for all
workstation components, the kit 3047 oers a single-row,
six-terminal strip. No additional components oering
resistance are in the path on any link of the static
protection system. Hard grounds are available on the six
terminals. The system is easily accessible, and mounts on
any at surface in new or existing workstation
environments. The protective cover is connected to
ground via a one-megohm resistor for the maximum
in personnel safety. In addition, three cable clips are
included to aid you in ground cord management.
Figure 1. 3048 Wrist Strap/Table Mat Grounding System.
Terminal Strip
Laminate
#6 Double
Studded
Screw
Wear Layer
Black Conductive Layer
Figure 2. 3047 Common Point Grounding System.
Figure 3. Installing the 3047 Common Point Grounding
System (top).
Laminate
Hole “A”
Terminal Strip
#6 Double
Studded Screw
Cover
Hole “B”
Wear Layer
Black
Conductive
Layer
Figure 4. Installing the 3047 Common Point Grounding
System (bottom).
Wrist Strap/Table Mat
Grounding System
3050 Snap
Fastener
Dissipative Table Mat
TB-9039 Page 2 of 2
© 2016 DESCO INDUSTRIES, INC.
Employee Owned
SCS - 926 JR Industrial Drive, Sanford, NC 27332 • (919) 718-0000 • Website: StaticControl.com
3042 Wrist Strap Grounding System
Grounding of two wrist straps using a common point to
ground is possible with the system 3042. It is easy to
identify for this purpose, with a clearly visible ground
symbol. Compact in size, it mounts to any at surface
where a wrist strap needs to be connected to a reliable
ground. The kit may be mounted on new workstations or
retrotted onto any existing workstation. Components of
the kit include one static dissipative engineering grade
plastic housing, one 10-foot (3 m) grounding cord with
multi stud ring terminal, strain relief for the grounding
cord, two banana jacks built into the housing, and two #8
galvanized, self-tapping Phillips screws.
3044 Laminate Grounding System
To properly ground a workstation with Static Protective
Hard Laminate, this kit gives you a choice of four methods
to provide proper grounding. This can be accomplished
from the top or the bottom of the work surface. Contents
of the kit include the hardware needed to establish reliable
connections to ground.
Cable Clip
Table TopSolderless
Ground Wire
Ground
Receptacle
#8 x 1 1/2"
Self-tapping Phillips
Head Screws
Figure 5. 3042 Wrist Strap Grounding System.
Figure 6. Installing 3042 Wrist Strap Grounding System.
Figure 7. 3044 Laminate Grounding System.
Figure 8. Installation of the 3044 Laminate Grounding
System.
F
A
B
C
D
E
A. 8-32-1 Cap screw D. Ring Terminal
B. Brass insert 1/2" dia. E. 8-32 Nut
C. 1/2" dia. flat washer F. Bench Mounted Ground with 2 Banana Jacks
Figure 9. Component Parts and Installation of the Flush
Mount Inserts and the Flush Mount Laminate Ground
Insert.
Important Notice
Before using this product, you must evaluate it and
determine if it is suitable for your intended application.
You assume all risks and liability associated with such
use.
Limited Warranty, Warranty Exclusions, Limit of
Liability and RMA Request Instructions
See the SCS Warranty -
http://staticcontrol.descoindustries.com/warranty.aspx
P1-P2

3042

Mfr. #:
Buy 3042
Manufacturer:
Description:
Battery Holders, Clips & Contacts Coin Cell Battery Holders SM COIN CELL CLIP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet