RPNS050BB1A21X Datasheet RPNS090AA1A11X, RPNS050BB1A21X, RPNS090AA1B11A | P1-P3

RPN Series

Hall-Effect Rotary

Position Sensors

DESCRIPTION

RPN Series Rotary Position Sensors use a magnetically

biased, Hall-effect integrated circuit (IC) to sense rotary

movement of the actuator shaft over a set operating range.

Rotation of the actuator shaft changes the IC’s position relative

to the magnets. The resulting flux density change is converted

to a linear output.

The IC, together with conditioning and protection circuitry, and

two permanent magnets, is sealed in a rugged package of

IP67 or greater for durability in most harsh environments.

Solid-state Hall-effect technology provides non-contact

operation, long service life, low torque actuation and reduced

wear-out mechanisms.

Eight operating ranges (50°, 60°, 70°, 90°, 120°, 180°, 270°

and 360°) are tolerant to over travel and allow use in most

common applications.

Five different supply voltages and eight different output

configurations, in either mA or Vdc, improve compatibility with

a variety of control systems.

Two versions provide dual outputs for use where an additional

output may be desired where redundancy and backup is

needed. Another potential application includes using one

output for an indicator and the second for the control system.

Lever versions are available. The easy-to-mount sensor has a

mounting flange with two round or oval mounting holes. All

products have AMP or Deutsch receptacles.

FEATURES

• Solid-state Hall-effect technology

• Eight operating ranges, up to 360°

• Variety of supply voltages and output configurations

• Rugged sealed package with integral connector

• IP67 or greater

• Integrated reverse polarity, short circuit and EMC protection

• Single or dual output versions available

• Industry-standard termination

POTENTIAL APPLICATIONS

Position and movement detection of pedals, throttle, gear shift,

levers, linkages, suspension and hitches in:

• Trucks

• Off road vehicles

• Industrial vehicles and equipment

• Construction vehicles and equipment

• Agricultural vehicles and equipment

• Cranes

RPN Series

2 www.honeywell.com/sensing

Table 1. RPNR Redundant (Dual) Output Specifications

Characteristic Parameter

Operating ranges available 50° (±25°), 90° (±45°)

Output available 50° (±25°): Channel 1: 4 mA (left), 20 mA (right); Channel 2: 0.25 Vdc (left), 4.75 Vdc (right)

90° (±45°): Channel 1: 0.25 Vdc (left), 4.75 Vdc (right); Channel 2: 4.75 Vdc (left), 0.25 Vdc (right)

Supply voltage range(s)

available

50° (±25°): Channel 1: 8.5 Vdc; Channel 2: 5 Vdc

90° (±45°): Channel 1: 10 Vdc to 30 Vdc; Channel 2: 10 Vdc to 30 Vdc

Current consumption 20 mA max.

Output signal delay 3 ms approx.

Accuracy ±1.6%

Hysteresis none

Linearity

RPNR050SDMEC3A21X

RPNR090KAAA3A11X

±0.35°

±0.6°

Reverse polarity protection yes

Operating and storage

temperature range

-40 °C to 125 °C [-40 °F to 257 °F]

EMC 200 V/m ISO 11452-3

Expected life 30x10

cycles

Protection class IP69K DIN 40050

Housing material PA66 plastic

Shaft material stainless steel

Termination AMP 1-1419168-1

Mechanical end stop no

Table 2. RPNS Single Output Specifications

Characteristic Parameter

Operating ranges available 50° (±25°), 60° (±30°), 70° (±35°), 90° (±45°), 120° (±60°),

180° (±90°), 270° (±135°), 360° (±180°)

Outputs available 0.25 Vdc (left), 4.75 Vdc (right)

0.5 Vdc (left), 4.5 Vdc (right)

1 Vdc (left), 9 Vdc (right)

3 Vdc (left), 5 Vdc (right)

4.5 Vdc (left), 0.5 Vdc (right)

4.75 Vdc (left), 0.25 Vdc (right)

4 mA (left), 20 mA (right)

20 mA (left), 4 mA (right)

Supply voltage range(s) available 5 Vdc, 8 Vdc to 30 Vdc, 10 Vdc to 30 Vdc

Current consumption (maximum) 20 mA

Output signal delay (approx) 3 ms

Reverse polarity protection yes

EMC 200 V/m ISO 11452-3

Operating and storage temperature range -40 °C to 125 °C [-40 °F to 257 °F]

Protection class IP67 DIN 40050

Accuracy ±1.6%

Hysteresis none

Linearity

RPNS050BB1A21X, RPNS050FA1A21X

RPNS060AC1A21X

RPNS070DD1A21X

All other listings

RPNS120AA1A21X

±0.35°

±0.6

±1°

±2°

±5°

Housing material PA66 plastic

Shaft material stainless steel

Expected life 30x10

cycles

Termination AMP Superseal 282087-1, Deutsch DT04-3P

Mechanical end stop no

Hall-Effect Rotary Position Sensors

Honeywell Sensing and Control 3

Figure 1. RPNR Redundant (Dual) Output Versions (For Reference Only: mm/[in].)

RPNR050DMEC3A21X

RPNR090KAAA3A11X

Figure 2. RPNS Single Output Versions (For Reference Only: mm/[in].)

RPNS050BB1A21X

RPNS050FA1A21X

4 Vdc3 Vdc 5 Vdc

L R

50°

27,7

[1.09]

37,7

[1.48]

4,2

[0.17]

[1,97]

[2.48]

[2.05]

20°

24,8

[0.98]

[0.55]

4,12

[0.16]

8,3

[0.33]

[0.20]

4,6

[0.18]

Ø20

[0.79]

Ø6

[0.24]

321

Ø2

[0.08]

Pinout

1 = Ground

2 = 10 Vdc to 30 Vdc Supply

3 = 3 Vdc to 5 Vdc Output

Angle (°)

25 25

Characteristic Curve

Receptacle: AMP Superseal 282087-1

Mating Connector: AMP Superseal 282103

RPNS060AC1A21X

RPNS070DD1A21X

P1-P3 P4-P6 P7-P8

RPNS050BB1A21X

Mfr. #:

Buy RPNS050BB1A21X

Manufacturer:

Description:

Industrial Motion & Position Sensors Single Output, 1 Vdc AMPSuperseal282087-1

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

RPNS050BB1A21X

RPNS050BB1A21X

Products related to this Datasheet