https://www.phoenixcontact.com/us/products/1437300
08/25/2014Page2/5
Sensor/Actuator cable-SAC-12P-M23MS/2,0-35T/FS SHSCO-1437300
Technical data
General
Number of positions 12
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC 61076-2-101
Status display No
Protective circuit/component Unwired
Surge voltage category II
Pollution degree 3
Torque 0.4 Nm (M12 connector)
Material
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PBT / PA 66
Material of grip body PUR
Material, knurls Nickel-plated brass
Cable
Cable type Black PUR/PVC twisted pair
Cable type (abbreviation) 35T
Conductor cross section 0.14 mm²
AWG signal line 26
Conductor structure signal line 18x 0.10 mm
Core diameter including insulation 1 mm ±0.05 mm
Wire colors
White-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/
blue
Overall twist Six pairs around the filler to the core
Shielding Tinned copper braided shield
Optical shield covering 85 %
External sheath, color Black RAL 9005
External cable diameter 8.50 mm
Number of bending cycles 2000000
Bending radius 85 mm
Traversing path 10 m
Traversing rate 3 m/s
Acceleration 10 m/s²
Outer sheath, material PUR
Material, inner sheath PVC