Notes:
1
Consult factory for life expectancy at other switching loads. Resistance >0.5Ω denes end of life or failure to open.
2
Optional diode is connected to pin #2 (+) and pin #3(-). Correct coil polarity must be observed.
Environmental Ratings:
Storage Temp: -35°C to
+
100°C; Operating Temp: -20°C to
+
85°C; Solder Temp: 270°C max; 10 sec. max
All electrical parameters measured at 25°C unless otherwise specied.
Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s
COTO TECHNOLOGY, INC.For most recent data visit www.cotorelay.com
MODEL NUMBER
9094
2
Parameters Test Conditions Units (20 Watt)
1 Form A SIP
COIL SPECS.
Nom. Coil Voltage VDC 5 12
Max. Coil Voltage VDC 6.5 15.0
Coil Resistance +/- 10%, 25° C
Ω
125 500
Operate Voltage Must Operate by VDC - Max. 3.75 9.0
Release Voltage Must Release by VDC - Min. 0.4 1.0
CONTACT RATINGS
Switching Voltage Max DC/Peak AC Resist. Volts 200
Switching Current Max DC/Peak AC Resist. Amps 0.5
Carry Current Max DC/Peak AC Resist. Amps 1.5
Contact Rating Max DC/Peak AC Resist. Watts 20
Life Expectancy-Typical
1
Signal Level 1.0V, 10mA x 10
6
Ops. 500
Static Contact
Resistance (max. init.)
50mV, 10mA
Ω
0.125
Dynamic Contact
Resistance (max. init.)
0.5V, 50mA
at 100 Hz, 1.5 msec
Ω
0.150
RELAY SPECIFICATIONS
Insulation Resistance
(minimum)
Between all Isolated Pins
at 100V, 25°C, 40% RH
Ω
10
12
Capacitance - Typical
Across Open Contacts
pF 0.1
Open Contact to Coil pF 2.0
Dielectric Strength
(minimum)
Between Contacts
Contacts to Coil
VDC/peak AC
VDC/peak AC
200
1500
Operate Time -
including bounce - Typical
At Nominal Coil Voltage,
30 Hz Square Wave
msec. 0.5
Release Time - Typical msec. 0.30
Top View:
Dot stamped on top of relay refers to pin #1 location
Grid = .1”x.1” (2.54mm x 2.54mm)
3
07082013
