Air flow
direction
250
3-M4 L=6
6
236
20.5
25.4
7.8
63.5
41
TB1
3
2
1
7
-V
+V
CN50
1
13
2
14
3-M4 L=4
3-M4 L=6
33.5
231.5
SVR51
6
236
127
18.5
90
10
25.4
7.8
20.5
Mechanical Specification
Case No.212A Unit:mm
Pin No. Function
Description
14
9
10,11
12
13
12V-AUX
DC_OK
GND
G-AUX
REMOTE
ON-OFF
Auxiliary voltage output, 10.8~13.2V, referenced to pin 12(G-AUX).
The maximum load current is 0.1A. This output is not controlled by the "remote ON/OFF control".
Open collector signal, referenced to pin10,11(GND). Low when PSU turns on.
The maximum sink current is 10mA and the maximum external voltage is 5.6V.
These pins connect to the negative terminal (-V). Return for DC_OK Signal output.
Turns the output on and off by electrical or dry contact between pin 13 ( ON/OFF) and pin 14 (12V-AUX).
Short: Power ON, Open: Power OFF.
Auxiliary voltage output ground.
The signal return is isolated from the output terminals (+V & -V).
5
PV
Connect to external DC voltage source for output voltage programming, referenced to pin 10,11 (GND).
6
7
8
PS
PC
PO
Reference pin regarding output voltage programming. Please refer to the Function Manual.
Reference pin regarding output current programming. Please refer to the Function Manual.
Connect to external DC voltage source for output current programming.
2
3
1
+VS
-S
+S
+V Signal. The +VS should be connected to the +S to reduce the noise when "output voltage programming" function is in use.
Negative sensing for remote sense.
Positive sensing for remote sense.
4-VS
-V Signal. The -VS should be connected to the -S to reduce the noise when "output voltage programming" function is in use.
1
1
1
1
1
1
2
13
14
※
Control Pin No. Assignment : HRS DF11-14DP-2DS or equivalent(CN50)
Mating Housing
Terminal
HRS DF11-14DS or equivalent
HRS DF11-**SC or equivalent
Mounting Screw
Mounting Surface
Chassis of RSP-750
L
2
2
2
1
750W Single Output Power Supply
RSP-750 series
File Name:RSP-750-SPEC 2018-01-15
2-M5
※ Mounting Instruction
Hole No. Recommended Screw Size MAX. Penetration Depth L Recommended mounting torque
1
2
6mm
4mm
M4
M4
7~11Kgf-cm
7~11Kgf-cm
