Eclipse Command System - NEMA 12
ECP Series
Command Enclosure
Application
Designed to enclose electronic controls, instruments and components in
indoor environments where dirt, dust, oil and water may be present.
Ideal for use with suspension systems.
Multiple mounting provisions and full front mounting space provide for ideal
operator interface.
Smooth flush surfaces and attractive finishes compliment high tech
equipment.
Standards
UL 508 Type 12
CSA Type 12
Complies with
NEMA Type 12 and 13
IEC 60529, IP54
Construction
Formed from 16 gauge steel.
Smooth, continuously welded seams ground smooth.
Door stiffeners are designed to also permit additional mounting options.
Formed lip on enclosure to exclude flowing liquids and contaminants.
Reversible rear door is secured with slotted quarter turn fasteners.
Door frames have zinc die-cast corners with extrusion pressed aluminum
profiles.
Door front panels are 3mm aluminum.
Oil resistant gaskets are permanently secured.
Bonding stud provided on door and grounding stud installed in enclosure.
Quarter turn latches formed from mild steel.
Formed steel hinge with stainless steel hinge pins.
Fastening is recommended with optional Tara Plus or 50/80 suspension
systems.
Optional red handle easily mounts horizontally to bottom of enclosure front
frame. Order separately.
Heavy duty re-inforcing plate included.
Finish
Finished in RAL 7040 gray powder coating.
Door panel is natural aluminum.
Accessories
Quality Products. Service Excellence.
