https://www.phoenixcontact.com/us/products/2891156
09/02/2016Page2/6
FO converters-FL MC 2000E SM40 LC-2891156
Technical data
Ambient conditions
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Altitude 4850 m
Degree of protection IP20
Noise immunity IEC61850-3, IEEE1613, EN61000-6-2: 2005
General
Electrical isolation VCC // FE // Ethernet
Latency 700 ns (Pass-through mode, 100Mbps, static)
Test voltage data interface/power supply 500 V DC
Noise emission EN 61000-6-4
Mounting position On horizontal DIN rail NS 35 in acc. with EN 60715
Net weight 498 g
Housing material Aluminum
Power supply
Nominal supply voltage 24 V DC
48 V DC
Supply voltage range 12 V DC ... 57 V DC
Typical current consumption 110 mA (24 V DC)
Connection method Plug-in screw terminal block (COMBICON), redundancy possible
Max. AWG conductor cross section, flexible 12
Min. AWG conductor cross section, flexible 24
Conductor cross section AWG max. 12
Conductor cross section AWG min. 24
Serial interface
Interface 1 Ethernet interface, 100Base-Tx in acc. with IEEE 802.3u
Connection method RJ45 socket, shielded
Transmission medium Copper
Transmission length 100 m (twisted pair, shielded)
Link through Link fault pass through
MDI-/MDI-X switchover Auto-MDI(X)
Signal LEDs LNK/ACT, 100
Data flow control/protocols IEC 61850-3, IEEE 1613
Serial transmission speed 100 Mbps
Optical interface FO