Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation
2111 Comprehensive Drive
Aurora, Illinois 60505
Phone: 630-851- 4722
Fax: 630- 851- 5040
www.conwin.com
Control
Voltage
or
N/C
15 pF
N/C
0.01 uF
10 uF
to
100 uF
1232
OH100-61003CF
10.0 MHz
123456789012
123456789012
Date Code (YYWW)
Model Number
Output Frequency
Serial # Barcode
Serial Number
Dimensional Tolerance:
±.005 (.127mm)
.500 Max.
(12.70mm)
Pin Connection
1: Output
2: Ground (Case)
3: Control Voltage or N/C
4: N/C
5: Supply Voltage (Vcc)
Package Outline
Bulletin
Cx205
Page
4 of 4
Revision
06
Date
03 Apr 2013
Solder Profile
120°C
150°C
180°C
260°C
0
220°C
Up to 120 s
Typical
10 s
60 to 90 s
Typical
Temperature
260°C
Meets IPC/JEDEC J-STD-020C
90%
50%
10%
CMOS Output Waveform
Package Marking
Test Circuit Pin Connections
Re-Stabilization Time
Off Time Re stabilization Time
<1 Hour <2 Hours *
<6 Hour <12 Hours *
<24 Hour <48 Hours *
1 to 16 Days 48 Hours + 1/4 Off Time *
>16 Days <6 Days *
* For a given off time, the time required to meet daily aging, short term stability requirements.
Revision 00, New issue, 03/01/11.
Revision 01, Updated power consumption. 07/27/11
Revision 02, Added sinewave models. 03/22/12
Revision 03, Updated marking information. 08/22/12
Revision 04, Added +10 dB Max to sinewave output characteristics . 09/18/12
Revision 05, Added application note AN2093 information. 12/07/12
Revision 06, Added ±5ppb models. 04/03/13
Attention: System Designers please review Application Note AN2093:
System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators.
@ www.conwin.com/technologies.html
Keep Out Area: Under the OCXO is a keep out area, do not place any parts in this area.
