PDA12X-350C Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage
185 to 304VAC for A Models
100 to 136VAC for B Models
Input Frequency
47~63Hz
Leakage Current
<0.5mA at 230VAC and maximum load
Maximum Input Current
≤1A
OUTPUT:
Total Output Power
12W
Efficiency
≥75% for A models
≥77% for B models
Power Factor
≥0.9
Ripple
Shall be less than 5% (p-p) of setting DC current output
under electrical load condition
ENVIRONMENTAL:
Operating Temperature -40 to 60°C (10W)
-40 to 50°C (12W)
Storage Temperature -40 to 77°C
Operating Humidity 10 to 95%
Storage Humidity 5 to 95%
Warranty
3 Years for standard models
8 Years for high reliability (-H) models
Ingression Protection
IP20; plastic housing
Mounting Provision
Screw mounting, accessible without opening unit
Open Circuit Protection
Once the circuit is opened, the output voltage should be
less than 45V at normal AC input conditions
EMC
FCC 47 part 15/18 Class A
EN55015/CISPR 15
Immunity
EN61000-4-2
EN61000-4-5**
EN61000-3-2 Class C
**In order to meet 2.5KV Ring Wave per Energy Star
SSL1.1 external MOVs are required:
560V 10mm for A models
240V 10mm for B models
Isolation Test
Primary to Secondary: 3000VAC, <5.5mA, 1 minute
Insulation Resistance
Primary to Secondary: 500VDC, >5M ohm, 1 minute
Input Over-Current Protection
The input power line will be fused with a 2A fuse
Short Circuit Protection
May withstand short circuit across outputs without
damage
Design Life
50K Hours minimum at max load and ambient 50°C
Design Life (H Models)
100K Hours minimum at max load and ambient 50°C
Input Connection
ANYTEK 2-pin terminal block – p/n
HC0200C3001AG
Position
Terminal
Color
Specification
Line Black
AWG18~22 Solid or
Standard
Neutral White
AWG18~22 Solid or
Standard
DC Output Connection
Superior Tech 2-pin p/n WRDD-DSXXT20WAA
mating AMP Connector p/n 1496992-1 or equivalent
