S7500 Product Specification
Finisar Corporation November 2015 Rev. C1 Page 7
IX. Patents
This product is protected under U.S. Patent Numbers 6,728,279 and 7,058,096, as well as other patents
pending worldwide.
X. Electrostatic Discharge
S7500 tunable lasers have been tested according to TIA-455-129 (FOTP-129)
2
“Procedures for Applying
Human Body Model Electrostatic Discharge Stress to Package Optoelectronic Components”. The S7500
tunable laser is classified as HBM ESDS Component Sensitivity Class 1A (per ESDA/JEDEC JS-001-
2010
3
).
CAUTION: This device is susceptible to damage as a result of electrostatic discharge. Take
proper precautions during both handling and testing. Follow guidelines such as
JEDEC standard JESD625-A (December 1999)
4
.
XI. Laser Safety
The S7500 tunable laser is classified as class 1M per IEC standard 60825-1 (2007-03)
5
. This product
complies with FDA/CDRH, 21 CFR 1040.10 and 1040.11
6
except for deviations pursuant to Laser Notice
No. 50, dated June 24, 2007
7
.
CAUTION: Invisible Laser Radiation - Do not view directly with optical instruments
(magnifiers). Viewing the laser output with certain optical instruments (e.g., eye
loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye
hazard. Laser power up to 100 mW at 1.55 µm could be accessible if optical
connector is open or fiber is broken. Use of controls, adjustments, and procedures
other than those specified herein may result in hazardous laser radiation exposure.
