Industrial Ethernet Solutions
Features
EKI-5726/I
Specifications
Communications
Standard IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN 10/100/1000Base-T(X)
Transmission Distance Up to 100 m
Transmission Speed Up to 1000 Mbps
Interface
Connectors 16 x RJ45
6-pin removable screw terminal (power & relay)
LED Indicators P1, P2, P-Fail, Loop detection
10/100/1000T(X): Link/Activity, Speed
Switch Properties
MAC Table Size 8K
Packet Buffer Size 4.1M bit
Switching Capacity 32 Gbps
Jumbo Frame 9216 bytes
Power
Power Consumption Max. 8 W
Power Input 12~48 V
DC
(8.4~52.8 V
DC
), redundant dual inputs
Fault Output 1 Relay Output
Mechanism
Dimensions (W x H x D) 74 x 120 x 84 mm
Enclosure IP30, metal shell with solid mounting kits
Mounting DIN-Rail, Wall
Protection
Reverse Polarity Present
Overload Current Present
Environment
Operating Temperature EKI-5726: -10~60°C (14~140°F)
EKI-5726I: -40~75°C (-40~167°F)
Storage Temperature -40 ~ 85°C (-40 ~ 185°F)
Operating Humidity 10 ~ 95% (non-condensing)
Storage Humidity 10 ~ 95% (non-condensing)
MTBF 2,788,343 hours
Certification
Safety IEC/EN60950, UL60950, UL508, Class 1 Division 2,
ATEX
EMI FCC Part 15 Subpart B Class A, EN 55011/55022
Class A
EMS EN 61000-4-2 (Level 3)
EN 61000-4-3 (Level 3)
EN 61000-4-4 (Level 3)
EN 61000-4-5 (Level 3)
EN 61000-4-6 (Level 3)
EN 61000-4-8 (Level 3)
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Communicates with SCADA software via Modbus/TCP
Communicates with NMS (Networking management system) via SNMP
Port-based QoS for deterministic data transmission
-40 ~ 75°C operating temperature range (EKI-5726I only)
12 ~ 48 V
DC
(8.4 ~ 52.8 V
DC
) wide-range power input
EMS level 3 protection for extreme outdoor environments
IEEE 802.3az Energy Efficient Ethernet (EEE)
Jumbo Frame Support (Up to 9,216 Bytes)
Supports redundant 12 ~ 48 V
DC
power input and P-Fail relay
Loop detection
Introduction
The EKI-5726/I is the world’s first convergence switch for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software
and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT.
The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately
necessary data over the remaining ports. The EKI-5726/I switch uses the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along
with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
RoHS
COMPLIANT
2011/65/EU
16-port Gigabit Ethernet ProView Switch
All product specifications are subject to change without notice Last updated : 5-May-2015
