2320131

https://www.phoenixcontact.com/us/products/2320131
12/15/2015Page1/7
DC/DC converters-QUINT-PS/12DC/24DC/ 5-2320131
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Primary-switched QUINT DC/DC converter for DIN rail mounting with SFB (Selective Fuse Breaking) Technology,
input: 12 V DC, output: 24 V DC/5 A
Product Description
QUINT DC/DC converter with maximum functionality
DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by
means of electrical isolation.
QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-
effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical
operating states before errors occur. 
Product Features
Reliable starting of difficult loads, thanks to the static POWER BOOST power reserve with up to 125% nominal current permanently
Preventive function monitoring indicates critical operating states before errors occur
Constant voltage: output voltage regenerated even at the end of long cables
Support conversion to various voltage levels
Electrical isolation: for setting up independent supply systems
Key Commercial Data
Packing unit 1 pc
Weight per Piece (excluding packing) 880.0 g
Custom tariff number 85044030
Country of origin China
Technical data
Dimensions
Width 32 mm
Height 130 mm
Depth 125 mm
https://www.phoenixcontact.com/us/products/2320131
12/15/2015Page2/7
DC/DC converters-QUINT-PS/12DC/24DC/ 5-2320131
Technical data
Dimensions
Width with alternative assembly 122 mm
Height with alternative assembly 130 mm
Depth with alternative assembly 35 mm
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport) -40 °C ... 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Noise immunity EN 61000-6-2:2005
Input data
Nominal input voltage range 12 V DC
Input voltage range 9 V DC ... 18 V DC
Inrush surge current < 15 A (typical)
Power failure bypass > 3 ms (12 V DC)
Input fuse 25 A (internal (device protection))
Type of protection Transient surge protection
Protective circuit/component Varistor
Output data
Nominal output voltage 24 V DC ±1%
Setting range of the output voltage 18 V DC ... 29.5 V DC (> 24 VDC, constant capacity restricted)
Nominal output current 5 A (-25 °C ... 60 °C)
POWER BOOST
6.25 A (-25°C...40°C permanent, U
OUT
= 24VDC )
SFB technology current reserve 30 A (12 ms)
Derating 60 °C ... 70 °C (2.5%/K)
Connection in parallel Yes, for redundancy and increased capacity
Connection in series Yes
Max. capacitive load Unlimited
Active current limitation Approximately 6.9 A
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple
< 75 mV
PP
Peak switching voltages nominal load
< 10 mV
PP
(20 MHz)
Maximum power dissipation in no-load condition 2 W
Power loss nominal load max. 13.5 W
https://www.phoenixcontact.com/us/products/2320131
12/15/2015Page3/7
DC/DC converters-QUINT-PS/12DC/24DC/ 5-2320131
Technical data
General
Net weight 0.7 kg
Efficiency > 90 %
Insulation voltage input/output 1.5 kV (type test)
1 kV (routine test)
Protection class III
> 1005000 h (40°C)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions
Alignable: 5 mm horizontally, 15 mm next to active components, 50 mm
vertically
Connection data, input
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 12
Stripping length 8 mm
Screw thread M3
Connection data, output
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 18
Conductor cross section AWG max. 12
Stripping length 7 mm
Screw thread M3
Connection data for signaling
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 12

2320131

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
Isolated DC/DC Converters QUINT-PS/12DC/24DC/5
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet