1
®
FN3282.13
DG411, DG412, DG413
Monolithic Quad SPST, CMOS Analog
Switches
The DG411 series monolithic CMOS analog switches are
drop-in replacements for the popular DG211 and DG212
series devices. They include four independent single pole
throw (SPST) analog switches, and TTL and CMOS
compatible digital inputs.
These switches feature lower analog ON-resistance (<35Ω)
and faster switch time (t
ON
<175ns) compared to the DG211
or DG212. Charge injection has been reduced, simplifying
sample and hold applications.
The improvements in the DG411 series are made possible
by using a high voltage silicon-gate process. An epitaxial
layer prevents the latch-up associated with older CMOS
technologies. The 44V maximum voltage range permits
controlling 40V
P-P
signals. Power supplies may be
single-ended from +5V to 44V, or split from ±5V to ±20V.
The four switches are bilateral, equally matched for AC or
bidirectional signals. The ON-resistance variation with analog
signals is quite low over a ±15V analog input range. The
switches in the DG411 and DG412 are identical, differing only
in the polarity of the selection logic. Two of the switches in the
DG413 (#2 and #3) use the logic of the DG211 and DG411
(i.e., a logic “0” turns the switch ON) and the other two
switches use DG212 and DG412 positive logic. This permits
independent control of turn-on and turn-off times for SPDT
configurations, permitting “break-before-make” or “make-
before-break” operation with a minimum of external logic.
Features
ON-Resistance (Max). . . . . . . . . . . . . . . . . . . . . . . . . 35Ω
Low Power Consumption (P
D
). . . . . . . . . . . . . . . . . . <35µW
Fast Switching Action
-t
ON
(Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175ns
-t
OFF
(Max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145ns
Low Charge Injection
Upgrade from DG211, DG212
TTL, CMOS Compatible
Single or Split Supply Operation
Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
Audio Switching
Battery Operated Systems
Data Acquisition
Hi-Rel Systems
Sample and Hold Circuits
Communication Systems
Automatic Test Equipment
Data Sheet June 20, 2007
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 1993, 1994, 1997, 1999, 2002, 2004-2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN3282.13
June 20, 2007
Pinout
DG411, DG412, DG413
(16 LD PDIP, SOIC, TSSOP)
TOP VIEW
Ordering Information
PART NUMBER PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. #
DG411DJ DG411DJ -40 to +85 16 Ld PDIP E16.3
DG411DJZ (Note) DG411DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3
DG411DY* DG411DY -40 to +85 16 Ld SOIC (150 mil) M16.15
DG411DYZ* (Note) DG411DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15
DG411DVZ* (Note) DG411 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173
DG412DJ DG412DJ -40 to +85 16 Ld PDIP E16.3
DG412DJZ (Note) DG412DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3
DG412DY* DG412DY -40 to +85 16 Ld SOIC (150 mil) M16.15
DG412DYZ* (Note) DG412DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15
DG412DVZ* (Note) DG412 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173
DG413DJ DG413DJ -40 to +85 16 Ld PDIP E16.3
DG413DJZ (Note) DG413DJZ -40 to +85 16 Ld PDIP** (Pb-free) E16.3
DG413DY* DG413DY -40 to +85 16 Ld SOIC (150 mil) M16.15
DG413DYZ* (Note) DG413DYZ -40 to +85 16 Ld SOIC (150 mil) (Pb-free) M16.15
DG413DVZ* (Note) DG413 DVZ -40 to +85 16 Ld TSSOP (4.4mm) (Pb-free) M16.173
*Add “-T” suffix for tape and reel.
**Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing
applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
TRUTH TABLE
LOGIC
DG411 DG412 DG413
SWITCH SWITCH
SWITCH
1, 4
SWITCH
2, 3
0OnOff Off On
1 Off On On Off
NOTE: Logic “0” 0.8V. Logic “1” 2.4V.
14
15
16
9
13
12
11
10
1
2
3
4
5
7
6
8
IN
1
D
1
S
1
V-
GND
S
4
IN
4
D
4
IN
2
S
2
V+
V
L
S
3
D
3
IN
3
D
2
Pin Descriptions
PIN SYMBOL DESCRIPTION
1IN
1
Logic Control for Switch 1.
2D
1
Drain (Output) Terminal for Switch 1.
3S
1
Source (Input) Terminal for Switch 1.
4 V- Negative Power Supply Terminal.
5 GND Ground Terminal (Logic Common).
6S
4
Source (Input) Terminal for Switch 4.
7D
4
Drain (Output) Terminal for Switch 4.
8IN
4
Logic Control for Switch 4.
9IN
3
Logic Control for Switch 3.
10 D
3
Drain (Output) Terminal for Switch 3.
11 S
3
Source (Input) Terminal for Switch 3.
12 V
L
Logic Reference Voltage.
13 V+ Positive Power Supply Terminal (Substrate).
14 S
2
Source (Input) Terminal for Switch 2.
15 D
2
Drain (Output) Terminal for Switch 2.
16 IN
2
Logic Control for Switch 2.
DG411, DG412, DG413
3
FN3282.13
June 20, 2007
Functional Diagrams Four SPST Switches per Package Switches Shown for Logic “1” Input
Schematic Diagram (1 Channel)
S
1
D
1
S
2
D
2
S
3
D
3
S
4
D
4
DG411
S
1
D
1
S
2
D
2
S
3
D
3
S
4
D
4
IN
1
DG412
IN
2
IN
3
IN
4
S
1
D
1
S
2
D
2
S
3
D
3
S
4
D
4
IN
1
DG413
IN
2
IN
3
IN
4
IN
2
IN
3
IN
4
IN
1
S
V+
IN
X
GND
V-
V-
V
L
D
V+
DG411, DG412, DG413

DG412DYZ-T

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Analog Switch ICs SWITCH 4X SPST N O 16N IND
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union