USB-ICP-80C51ISP Datasheet USB-ICP-80C51ISP | P1-P2

USB-ICP

USB-ICP–80C51ISP

USB

In-Circuit

Programmer

USB-ICP supports In-System Programming (ISP) on Philips 80C51 Flash

based microcontroller families. In-System Programming uses a two-wire

serial interface to program and erase ISP enabled microcontroller devices

without removing them from the system. The ISP function uses only six

pins: VCC, GND, RXD, TXD, PSEN- and RESET. A small connector is all

that is needed to interface your ISP application to the USB-ICP programmer.

Highlights

• USB port powered so no

external Power Supply required

• Supports USB 2.0

• Plugs directly into any standard

USB Port – great for laptops

• Supports Philips’ P89C51 Flash

family of microcontrollers

• Works with Philips’ free Flash

Magic software that can be

downloaded from the web

• USB-ICP Kit Includes:

♦ USB-ICP dongle

♦ 18” cable allowing direct

connection to the user's

application

♦ ISP design guide for the

user’s target board

Rev 2.0 8/9/2006

Technical Details

USB-ICP uses a standard RJ-45 for

connection to the target cable.

Indicator LEDs

Green – “Link” Indicates the USB-ICP

has been configured by the host PC

Yellow –“ACT” indicates USB

Activity (Rx/Tx)

Target Schematic

TXD

PSEN-

RESET

VCC

RXD

The ISP function uses only six pins: VCC, GND, RXD, TXD, PSEN- and

RESET. The simple circuit above is all that must be added to the

user’s application to use ISP with USB-ICP.

Target Connector

Example Molex Part Numbers

Part Number Description

22-03-2061 6pin vertical through hole

68301-1017 6pin vertical surface mount

22-05-2061 6pin right angle through hole

Ordering Information

USB ICP Family

Part Number Supports

USB-ICP-LPC9xx Philips LPC9xx

USB-ICP-80C51ISP Philips P89C51 Flash

USB-ICP-LPC2K Philips ARM7 LPC2xxx

Part Number: USB-ICP-80C51ISP

www.digikey.com

Digi-Key P/N: 622-1001-ND

Warranty

: 30-day money back guarantee

Availability: Stock

(800) 278-0293 Phone

(256) 883-1241 FAX

www.teamfdi.com

All brand names and product names are trademarks or registered trademarks of their respective holders.

The target connector utilized is a

standard 0.100” pitch 6-pin header

available from numerous su

liers.

P1-P2

USB-ICP-80C51ISP

Mfr. #:

Buy USB-ICP-80C51ISP

Manufacturer:

Future Designs, Inc. (FDI)

Description:

Programmers - Processor Based In-System Programmer for NXP 80C51ISP

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

USB-ICP-80C51ISP