8
Intensity Bin Limits (mcd)
Green
IV Bin Category Min. Max
M 5.401 8.600
N 8.601 13.700
P 13.701 21.800
Q 21.801 34.700
Tolerance: ±15%
SMT Soldering Prole
Pb free reow soldering Prole
Yellow / Red / Orange
IV Bin Category Min. Max
N 8.601 13.700
P 13.701 21.800
Q 21.801 34.700
R 34.701 55.200
Tolerance: ±15%
Recommended soldering pattern (unit: mm)
245°C
TIME
TEMPERATURE
6°C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
3
°C/SEC. MAX.
3
°C/SEC. MAX.
10 - 30 SEC.
150
°C
200
°C
217
°C
(Acc. to J-STD-020C)
1.8
2.45 x 4 = 9.8
16
3
Recommended stencil window opening is 80%
Notes:
1. The peak temperature refers to the peak package body tempera-
ture.
2. Number of reow process shall be limited to maximum 2 times only.
Cooling process to normal temperature is required between rst
and second soldering process.
Note:
1. Bin categories are established for classication of products. Prod-
ucts may not be available in all categories. Please contact your
Avago representative for information on currently available bins.