DS21T05
4 of 7
PIN DESCRIPTION Table 1
DS21T05Z
PIN
SYMBOL DESCRIPTION
1 TERMPWR1 Termination Power 1. Should be connected to the SCSI TERMPWR
line. Must be decoupled with either a 2.2 µF or 4.7 µF. See Figure 2.
2R1Signal Termination 1. 110-ohm termination.
3R2Signal Termination 2. 110-ohm termination.
4R3Signal Termination 3. 110-ohm termination.
5R4Signal Termination 4. 110-ohm termination.
6R5Signal Termination 5. 110-ohm termination.
7VREF1Reference Voltage 1. Must be externally connected directly to the
VREF2 pin. Must be decoupled with a 4.7 µF capacitor as shown in
Figure 2.
8 GND Ground. Signal ground; 0.0V.
9 TERMPWR2 Termination Power 2. Should be connected to the SCSI TERMPWR
line. Must be decoupled with either a 2.2 µF or 4.7 µF. See Figure 2.
10 NC No Connect. Do not connect any signal to this pin.
11 R6 Signal Termination 6. 110-ohm termination.
12 R7 Signal Termination 7. 110-ohm termination.
13 R8 Signal Termination 8. 110-ohm termination.
14 R9 Signal Termination 9. 110-ohm termination.
15 VREF2 Reference Voltage 2. Must be externally connected directly to the
VREF1 pin. Must be decoupled with a 4.7 µF capacitor as shown in
Figure 2.
16
PD
Power Down. When tied low, the DS21T05 enters a power-down
mode. Contains an internal 50K pull-up. Strap low to deactivate the
DS21T05, leave open circuited to activate the DS21T05.