NOTES: (UNLESS OTHERWISE SPECIFIED)
1. ALL DIMENSIONS ARE IN INCHES [mm].
2. DIMENSIONS APPLY AFTER FINISHING.
3. MANUFACTURE TO BE COMPLIANT WITH EU RoHS DIRECTIVE.
4. SAFETY BREAK ALL SHARP CORNERS AND EDGES .02 MAXIMUM.
SHEET 1 OF 1
LDCFDLT_A
SCALE: 2:1
TITLE:
SIZE
DWG. NO.
REV
DO NOT SCALE DRAWING
ANGLES:
1
TOLERANCES:
.020 [0.50]-.200 [5.00]=
.008 [0.20]
.200 [5.00]-1.200 [30.00]=
.016 [0.40]
1.20 [30.0]-4.75 [120.0]=
.024 [0.60]
4.75 [120.0]-12.40 [315.0]=
.040 [1.0]
DRAWN:
ENGR:
DT:
DT:
MATERIAL:
FINISH:
PROJECTION:
:
THIS DRAWING CONTAINS PROPRIETARY INFORMATION
THAT IS THE SOLE PROPERTY OF LINX TECHNOLOGIES, AND SHALL BE
TREATED AS SUCH. NO DISCLOSURE OR REPRODUCTION OF THIS
DOCUMENT IS PERMITTED, IN WHOLE OR IN PART, WITHOUT THE
EXPRESS WRITTEN PERMISSION OF LINX TECHNOLOGIES OR ITS
DESIGNATED AGENTS.
159 ORT LANE
MERLIN, OR 97532
B
RP-MCX FEMALE CABLE END CRIMP
FOR RG174 CABLE
CONREVMCX011
11-JUL-12
B.MURPHY
S.HOGAN
11-JUL-12
REVISIONS
REV
DESCRIPTION
DATE
APPV
B
Added new title block and heat shrink; updated instructions 11-JUL-12 SAH
Descripon Material Finish
Body
Pin
Insulaon
Gold
N/A
Gold
PTFE
Crimp Ring GoldBrass
Heat Shrink BlackPolyolefin
Brass
PH Bronze
Ø0.102
(2.60)
0.382
(9.70)
0.575
(14.60)
Ø0.197
(5.00)
SIDE VIEW
Ø0.037
(0.95)
0.232
(5.90)
PIN
Ø0.154
(3.90)
0.276
(7.00)
CRIMP RING
0.189
(4.80)
0.102
(2.60)
RECOMMENDED CABLE STRIPPING DIMENSIONS
0.079
(2.00)
RG-174 Cable
CONREVMCX011 ASSEMBLY INSTRUCTIONS
1. Strip the cable to the recommended dimensions.
2. Slip heat shrink and crimp ring onto stripped cable.
3. Solder the pin to the center conductor.
4. Insert the pin, center conductor, and insulator into the body
until the pin snaps in.
5. Wrap the braid around the tail of the body and crimp the ring with a
0.128" hex crimp tool (or one labeled for use with RG-174 cable).
6. Use heat shrink to cover crimp.
Ø0.197
(5.00)
0.787
(20.00)
HEAT SHRINK
