Philips Semiconductors Product specification
74LV365Hex buffer/line driver (3-State)
1998 May 29
4
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT
V
CC
DC supply voltage See Note 1 1.0 3.3 3.6 V
V
I
Input voltage 0 – V
CC
V
V
O
Output voltage 0 – V
CC
V
T
amb
Operating ambient temperature range in free air
See DC and AC
characteristics
–40
–40
+85
+125
°C
t
r
, t
f
Input rise and fall times
V
CC
= 1.0V to 2.0V
V
CC
= 2.0V to 2.7V
V
CC
= 2.7V to 3.6V
–
–
–
–
–
–
–
500
200
100
ns/V
NOTE:
1. The LV is guaranteed to function down to V
CC
= 1.0V (input levels GND or V
CC
); DC characteristics are guaranteed from V
CC
= 1.2V to V
CC
= 3.6V.
ABSOLUTE MAXIMUM RATINGS
1,
2
In accordance with the Absolute Maximum Rating System (IEC 134).
Voltages are referenced to GND (ground = 0V).
SYMBOL
PARAMETER CONDITIONS RATING UNIT
V
CC
DC supply voltage –0.5 to +4.6 V
±I
IK
DC input diode current V
I
< –0.5 or V
I
> V
CC
+ 0.5V 20 mA
±I
OK
DC output diode current V
O
< –0.5 or V
O
> V
CC
+ 0.5V 50 mA
±I
O
DC output source or sink current
– bus driver outputs
–0.5V < V
O
< V
CC
+ 0.5V 35 mA
±I
GND
,
±I
CC
DC V
CC
or GND current for types with
–bus driver outputs
70 mA
T
stg
Storage temperature range –65 to +150 °C
Power dissipation per package for temperature range: –40 to +125°C
–plastic DIL above +70°C derate linearly with 12mW/K 750
tot
–plastic mini-pack (SO) above +70°C derate linearly with 8 mW/K 500
–plastic shrink mini-pack (SSOP and TSSOP) above +60°C derate linearly with 5.5 mW/K 400
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
