NLX2GU04
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage ï0.5 to +7.0 V
V
IN
DC Input Voltage ï0.5 to +7.0 V
V
OUT
DC Output Voltage ï0.5 to +7.0 V
I
IK
DC Input Diode Current V
IN
< GND ï50 mA
I
OK
DC Output Diode Current V
OUT
< GND ï50 mA
I
O
DC Output Source/Sink Current ±50 mA
I
CC
DC Supply Current Per Supply Pin ±100 mA
I
GND
DC Ground Current per Ground Pin ±100 mA
T
STG
Storage Temperature Range ï65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias 150 °C
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 Vï0 @ 0.125 in
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125 °C (Note 5) ±500 mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mmïbyï1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/JESD22ïA114ïA.
3. Tested to EIA/UESD22ïA115ïA.
4. Tested to JESD22ïC101ïA.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min Max Unit
V
CC
Positive DC Supply Voltage 1.65 5.5 V
V
IN
Digital Input Voltage 0 5.5 V
V
OUT
Output Voltage 0 5.5 V
T
A
Operating FreeïAir Temperature ï55 +125 °C
Dt/DV
Input Transition Rise or Fall Rate V
CC
= 3.3 V ± 0.3 V
V
CC
= 5.0 V ± 0.5 V
0
0
100
20
ns/V
