CS5205A−1
http://onsemi.com
2
MAXIMUM RATINGS*
Parameter Value Unit
Supply Voltage, V
CC
17 V
Operating Temperature Range −40 to +70 °C
Junction Temperature 150 °C
Storage Temperature Range −60 to +150 °C
Lead Temperature Soldering: Wave Solder (through hole styles only) Note 1
Reflow (SMD styles only) Note 2
260 Peak
230 Peak
°C
1. 10 second maximum.
2. 60 second maximum above 183°C.
*The maximum package power dissipation must be observed.
ELECTRICAL CHARACTERISTICS (C
IN
= 10 μF, C
OUT
= 22 μF Tantalum, V
IN
− V
OUT
= 3.0 V, V
IN
≤ 15 V, 0°C ≤ T
A
≤ 70°C,
T
J
≤ +150°C, unless otherwise specified, I
full
load
= 5.0 A.)
Characteristic
Test Conditions Min Typ Max Unit
Adjustable Output Voltage
Reference Voltage (Notes 3 and 4)
V
IN
− V
OUT
= 1.5 V; V
Adj
= 0 V,
10 mA ≤ I
OUT
≤ 5.0 A
1.241
(−1%)
1.254 1.266
(+1%)
V
Line Regulation 1.5 V ≤ V
IN
− V
OUT
≤ 6.0 V; I
OUT
= 10 mA − 0.04 0.20 %
Load Regulation (Notes 3 and 4) V
IN
− V
OUT
= 1.5 V; 10 mA ≤ I
OUT
≤ 5.0 A − 0.08 0.4 %
Dropout Voltage (Note 5) I
OUT
= 5.0 A; T
J
≥ 25°C − 1.15 1.25 V
Current Limit V
IN
− V
OUT
= 3.0 V; T
J
≥ 25°C
V
IN
− V
OUT
= 9.0 V
5.5
−
8.5
1.0
−
−
A
A
Minimum Load Current V
IN
− V
OUT
= 7.0 V − 1.2 6.0 mA
Adjust Pin Current − 50 100 μA
Adjust Pin Current Change 1.5 V ≤ V
IN
− V
OUT
≤ 4.0 V;
10 mA ≤ I
OUT
≤ 5.0 A
− 0.2 5.0 μA
Thermal Regulation 30 ms pulse; T
A
= 25°C − 0.003 − %W
Ripple Rejection f = 120 Hz; C
Adj
= 25 μF; I
OUT
= 5.0 A − 82 − dB
Temperature Stability − − 0.5 − %
RMS Output Noise 10 Hz ≤ f ≤ 10 kHz; T
A
= 25°C − 0.003 − %V
OUT
Thermal Shutdown − 150 180 − °C
Thermal Shutdown Hysteresis − − 25 − °C
3. Load regulation and output voltage are measured at a constant junction temperature by low duty cycle pulse testing. Changes in output
voltage due to thermal gradients or temperature changes must be taken into account separately.
4. Specifictions apply for an external Kelvin sense connection at a point on the output pin 1/4” from the bottom of the package.
5. Dropout voltage is a measurement of the minimum input/output differentail at full load.
PACKAGE PIN DESCRIPTION
Package Pin Number
Pin Symbol Function
TO−220−3 D
2
PAK−3
1 1 Adj Adjust pin (low side of the internal reference).
2 2 V
OUT
Regulated output voltage (case).
3 3 V
IN
Input voltage.
