MAX4906/MAX4606F/MAX4907/MAX4907F
High-/Full-Speed USB 2.0 Switches
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS (continued)
(V+ = +3V to +3.6V, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at V+ = 3.3V, T
A
= +25°C.) (Note 2)
Note 2: All units are 100% production tested at T
A
= +25°C. Limits over the operating temperature range are guaranteed by design
and not production tested.
Note 3: The switch will turn off for voltages above (V
FP
); therefore, protecting downstream circuits in case of a fault condition
(MAX4906F/MAX4907F).
Note 4: ΔR
ON(MAX)
= | R
ON(CH1) –
R
ON(CH2)
|
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance, as measured over
specified analog signal ranges.
Note 6: Between any two switches.
Note 7: Switch off-capacitance, switch on-capacitance, output skew between switches, and output skew same-switch limits are not
production tested; design guaranteed by bench characterization.
Typical Operating Characteristics
(T
A
= +25°C, unless otherwise noted.)