Wireless universal transmitter
RF I/O SW915-4E
Material number: 1432305
Features/Options
Thermoplastic enclosure
sWave® wireless technology
Note
The RF I/O may be used in combination with an wireless inductive
sensor RF IS
Connection of external switching contact (potentialfree contact) with
gold contacts possible.
Delivery does not include protective caps.
Created: 25.11.2016 Pe Status: Revision: -
page
1 / 2
steute Schaltgeräte
GmbH & Co. KG
Brückenstraße 91
32584 Löhne, Deutschland
phone +49 (0) 5731 745-0
fax +49 (0) 5731 745-200
info
@
steute.com
www.steute.com
No wiring and pipe laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configurated at the receiver
Dimensions
Pin-assignment
Colour coding only valid for
Coupling 4-poles mat. no. 1215497 and
Coupling 4-poles mat. no. 1262873
Technical Data
Standards EN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
Enclosure ABS (Acrylnitril-Butadien-Styrol)
Connection 4 x Plug-in connector M12 x 1; 4-pole
Degree of protection IP 67 to IEC/EN 60529
Wireless protocol sWave®
Ambient temperature 20 °C +65 °C
Operation cycles approx. 12000 telegrams at
repetitions/h
Switching frequency max. 5 Hz
Standby current 60A
Voltage supply Lithium battery Tadiran SL-760
(Europe); TL-5903 (North America)
system Li/SOCl2; (replaceable)
Nominal voltage 3.6 V
Capacity 2.2 Ah
Frequency 915 MHz (USA, Canada and Australia)
Transmission power < 10 mW
Data rate 66 kbps
Channel bandwidth 400 kHz
Sensing range max. 450 m outside,
max. 40 m inside
Battery life depending on the switching frequency
and number and type of sensors
for 1000 transfers/day and one
inductive sensor approx. 300 days;
for 1000 transfers/day and one
mechanical switch approx. 1400 days
Actuating time min. 80 ms
Approvals USA: FCC: XK5-RFRXSW915;
Canada: IC: 5158A-RFRXSW915
Note Transmission of battery voltage;
status signal: individually
adjustable via jumper, no, 10 s,
100 s, 1000 s, 10 000 s
Errors and omissions excepted.