130-160MT..KB Series
Bulletin I27502 rev. A 05/03
ELECTRICAL SPECIFICATIONS
Voltage Ratings
Voltage V
RRM
, maximum repetitive V
RSM
, maximum non- I
RRM
max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ T
J
max.
VVmA
80 800 900
100 1000 1100
130-160MT..KB 120 1200 1300 10
140 1400 1500
160 1600 1700
I
O
Maximum DC output current 130 (160) 160 (200) A 120° Rect conduction angle
@ Case temperature 85 (62) 85 (60) °C
I
FSM
Maximum peak, one-cycle forward, 1130 1430 A t = 10ms No voltage
non-repetitive surge current 1180 1500 t = 8.3ms reapplied
950 1200 t = 10ms 100% V
RRM
1000 1260 t = 8.3ms reapplied Initial T
J
= T
J
max.
I
2
t Maximum I
2
t for fusing 64000 10200 A
2
s t = 10ms No voltage
5800 9300 t = 8.3ms reapplied
4500 7200 t = 10ms 100% V
RRM
4100 6600 t = 8.3ms reapplied
I
2
√t Maximum I
2
√t for fusing 64000 102000 A
2
√s t = 0.1 to 10ms, no voltage reapplied
V
F(TO)1
Low level value of threshold voltage 0.78 0.81 V (16.7% x π x I
F(AV)
< I < π x I
F(AV)
), @ T
J
max.
V
F(TO)2
High level value of threshold voltage 0.99 1.04 (I > π x I
F(AV)
), @ T
J
max.
r
f1
Low level value of forward slope resistance 4.59 3.52 mΩ (16.7% x π x I
F(AV)
< I < π x I
F(AV)
), @ T
J
max.
r
f2
High level value of forward slope resistance 4.17 3.13 (I > π x I
F(AV)
), @ T
J
max.
V
FM
Maximum forward voltage drop 1.63 1.49 V I
pk
= 200A, T
J
= 25°C, t
p
= 400µs single junction
V
INS
RMS isolation voltage 4000 4000 V T
J
= 25°C, all terminal shorted
f = 50Hz, t = 1s
Parameter 130MT.KB 160MT.KB Units Conditions
Forward Conduction
Thermal and Mechanical Specifications
T
J
Max. junction operating temperature range -40 to 150 °C
T
stg
Max. storage temperature range -40 to 150 °C
R
thJC
Max. thermal resistance, junction to case 0.16 0.12 K/W DC operation per module
0.93 0.73 DC operation per junction
0.18 0.15 120° Rect condunction angle per module
1.08 0.88 120° Rect condunction angle per junction
R
thCS
Max. thermal resistance, case to heatsink 0.03 K/W Per module
Mounting surface smooth, flat and greased
T Mounting torque ± 10% to heatsink 4 to 6 Nm
to terminal 3 to 4
wt Approximate weight 176 g
Parameter 130MT.KB 160MT.KB Units Conditions
A mounting compound is recommended and the
torque should be rechecked after a period of 3
hours to allow for the spread of the compound.
Lubricated threads.
