CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
80
CAT.8100F
RE5
Test condition
Capacitance change
tan b
ESR( 1)
Leakage current ( 2)
105°C, rated voltage 2000Hrs.
Within ±20% of initial value before test
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
–55 to +105°C
2.5 to 4.0V
560 to 820μF
±20% at 120Hz, 20°C
Less than or equal to the specified value at 120Hz, 20°C
Less than or equal to the specified value at 100kHz, 20°C
Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C
Specifications
Performance CharacteristicsItem
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Endurance
Tangent of loss angle (tan b)
Leakage Current ( 2)
ESR ( 1)
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
(mm)
qD×L
8×8
qd
0.6
P
3.5
α
1.0
Aluminum case
Stand off
Wire(Lead free)
Dimensions
FP
64Aq
821
2.5
/RW1R
3URGXFW/RJR
9ROWDJH
&DSDFLWDQFH
FPCAP part number
)3 5 5( 0 ( &*
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
&DSDFLWDQFH
)
9ROWDJH9
6HULHVQDPH
7\SH
φD
±0.5
MAX.
P
±0.5
L+α
MAX.
15
MIN.
4
MIN.
φd
Type numbering system (Example : 2.5V 820μF)
Nichicon part number
5
(
(
0
'
1
&
*
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
5DWHGFDSDFLWDQFH)
5DWHGYROWDJH9
6HULHVQDPH
7\SH
Ultra-low ESR, Low Profile (φ8)
Dimension table in next page.
Ultra Low ESR, High ripple current.
Low Profile(Height 8mm).
Load life of 2000 hours at 105°C.
Radial lead type : Lead free flow soldering condition
correspondence.
Compliant to the RoHS directive (2011/65/EU).
RL8
RE5
Lower ESR
RR5
Lower
Profile
Frequency coefficient of rated ripple current
Coefficient
Frequency
120 Hz 1 kHz 10 kHz 100 kHz
300 kHz
0.10 0.45 0.50 1.00 1.00
