TPC11CA thru TPC36CA
www.vishay.com
Vishay General Semiconductor
Revision: 20-Jan-17
1
Document Number: 87649
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount PAR
®
Transient Voltage Suppressors
Bi-directional 1500 W TVS in TO-277 (SMPC) Package
Note
• All electrical characteristics are only applicable when two
identical polarity terminals are connected.
FEATURES
• Junction passivation optimized PAR
®
design
•T
J
= 185 °C capability suitable for high reliability
and automotive requirement
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
• Bi-direction only
• Excellent clamping capability
• Low leakage current
• Very fast response time
• AEC-Q101 qualified available
- Automotive ordering code: base P/NHM3
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for automotive,
consumer, computer, industrial, and telecommunication.
MECHANICAL DATA
Case: TO-277A (SMPC)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHM3 - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HM3 suffix meets JESD 201 class 2 whisker test
Polarity: no marking on bi-directional types
Note
(1)
Non-repetitive current pulse per fig.3 and derated above T
A
= 25 °C
PRIMARY CHARACTERISTICS
V
WM
10.5 V to 37.8 V
V
BR
(Bi-directional) 11 V to 36 V
P
PPM
1500 W
T
J
max. 185 °C
Polarity Bi-directional
Package TO-277A (SMPC)
TO-277A (SMPC)
eSMP
®
Series
Terminal 1
Terminal 2
MAXIMUM RATINGS (T
A
= 25 °C, unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak power dissipation with a 10/1000 μs waveform
(1)
P
PPM
1500 W
Peak pulse current with a 10/1000 μs waveform
(1)
I
PPM
See next table A
Operating junction and storage temperature range T
J
, T
STG
-65 to +185 °C