OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

W58-XB1A4A-25

P1-P3
1
Catalog 1308242
Issued 3-03 (PDF Rev. 5-10)
Revised 5-10
www.tycoelectronics.com
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Dimensions are shown for reference
purposes only. Specifications and
availability subject to change.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080208
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Time vs. Current Trip Curve @ +25°C
W58 series
P&B Push To Reset Only
Thermal Circuit Breaker
Load Current As A Percent
Of Breaker Rating
Time In Seconds
1000
900
800
700
600
500
400
300
200
100
0
.1 1 10 100 1000
(A)
(B)
(A) All 5-30 Amp Models (B) All 1-4 Amp Models
Overload Trip Times
100%
145%
200%
400%
600%
800%
1000%
No Trip
Trip in 1 hour
6.0-30 Sec.
1.6-4.5 Sec.
0.60-1.7 Sec.
0.25-0.90 Sec.
0.15-0.65 Sec.
Overload Trip Times
100%
145%
200%
400%
600%
800%
1000%
No Trip
Trip in 1 hour
10-45 Sec.
3.0-14.0 Sec.
1.4-7.0 Sec.
0.75-4.3 Sec.
0.50-3.4 Sec.
Ambient Compensation Chart
–20
–10
0
10
20
30
40
50
60
1.40
1.30
1.20
1.10
1.00
0.90
0.80
0.70
0.60
Correction Factor
Ambient Temperature In Degrees Centigrade (°C)
To use this chart: Read up from the ambi ent
temperature to the curve, and across to find a correction
factor. Multiply the breaker rating by the correction
factor to determine the compensated rating. Calculate
the overloads in terms of the compensated rating to use
the published trip curve.
Features
•
0.5 amp to 30 amp ratings.
• Cannot be manually tripped.
• Button extends for visual trip indication.
•
Push button to reset breaker.
•
Termination is screw or .250” QC.
• Bottom marked amperage rating optionally available.
Agency Approvals
W
58 Series is UL 1077 Recognized as Supplementary Protectors, File
E69543 and meets Ignition Protection requirements in accordance
w
ith UL 1500. W58 Series is also CSA Accepted as Supplementary
Protectors (Appliance Component Protectors), File LR15734.
U
sers should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to confirm the product meets the
requirements for a given application.
Electrical Data @ +25°C
Calibration: Breaker will continuously carry 100% of rated load. It may trip
between 101% and 145% of rated load, but must trip at
145% at 25°C.
Dielectric Strength: Over 1,500 volts RMS.
Maximum Operating Voltages: 50VDC; 250VAC.
Interrupt Capacity: 2,000 amps at 50VDC (0.5 - 30 amp models).
1,000 amps at 250VAC (0.5 - 30 amp models).
Note: 30 amp model not UL or CSA.
Resettable Overload Capacity: Ten times rated current.
Maximum Resistance vs. Current Rating @ +25°C
Mechanical/Environmental Data
Shock: Withstands to 10g.
Endurance Cycling: Over 1,000 cycles at 200% of rated load.
Vibration: Withstands to 10g at 10-55 Hz.
Weight: Less than 1 1/2 oz. (42.5g).
C
urrent Maximum Current Maximum
Rating Resistance Rating Resistance
in Amps in Ohms in Amps in Ohms
0
.5 5.0 8 0.020
1 1.35 9 0.020
2 0.32 10 0.014
3
0.18 12 0.010
4 0.10 15 0.010
5
0.026 20 0.005
6 0.026 25 0.006
7
0.020 30* 0.004
*
No UL/CSA
2
Catalog 1308242
Issued 3-03 (PDF Rev. 5-10)
Revised 5-10
www.tycoelectronics.com
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Dimensions are shown for reference
purposes only. Specifications and
availability subject to change.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080208
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
W58-XB1A4A-1
W58-XB1A4A-2
W58-XB1A4A-3
W58-XB1A4A-4
W58-XB1A4A-5
W58-XB1A4A-6
W58-XB1A4A-7
W58-XB1A4A-8
W58-XB1A4A-10
W58-XB1A4A-12
W58-XB1A4A-15
W58-XB1A4A-20
W58-XB1A4A-25
W58-XB1A4A-30
W58-XC4C12A-1
W58-XC4C12A-2
W58-XC4C12A-3
W58-XC4C12A-5
W58-XC4C12A-7
W58-XC4C12A-10
W58-XC4C12A-15
W58-XC4C12A-20
W58-XC4C12A-25
W58-XC4C12A-30
Stock Items – Authorized distributors are more likely to stock the following items.
Outline Dimensions
Ordering Information
T
ypical Part No.
>W58 -X B1A4A-5
1
. Designator:
W
= Circuit breaker
2
. Series Number:
58 = Single Pole, Push-to-Reset
3
. Circuit Function:
X
= Series Trip
4. Button and Rate Marking:
A = White, plain, no rate marking, no trip band E = White with red rate marking no trip band
B
= White with red rate marking, red trip band F = White with black rate marking, no trip band
C
= White with black rate marking, red trip band K = Black, plain, no rate marking, no trip band
Note: Rate marking on the bottom of the case is available on a special order basis. Consult factory for details.
5. Mounting Bushing:
1
= Metal, 7/16” x .500” (12.70mm) long 7 = Plastic, 3/8” x .465” (11.81mm) long, round
4
= Metal, 15/32” x .300” (7.62mm) long, black
6 = Metal, 3/8” x .465” (11.81mm) long, round
6
. Terminals:
A
= Quick connect .250” (6.35mm) straight
C = 6/32 screw 90° (screws installed)
D = 6/32 screw 90° (screws bulk packed)
7
. Mounting Hardware:
4 = Metal, knurled nut/hex nut 7 = Plastic, knurled nut
6 = Metal, knurled nut/hex nut/lock washer 22 = Plastic knurled nut, metal lock washer
12 = Metal, knurled nut/lock washer
15 = Metal, two hex nuts/lock washer
18 = Metal, hex nut/lock washer 99 = No mtg. hardware supplied (Use C, Step #8)
Note: For other hardware combinations, order separately. See mounting hardware Ordering Information table.
8. Mounting Hardware Packaging:
A = Assembled to bushing
B = Bulk unassembled
C = No mounting hardware
9. Specify Amp Rating:
0.5 369 15 30*
14 7 10 20
25 8 12 25
*Not UL or CSA
.440
(11.18)
1.375
(34.93)
.425
(10.80)
.850
(21.59)
SEE TERMINAL DRAWINGS
FOR DETAIL
.312.005
(7.92.13)
.050 MAX.
(1.27)
CLOSED POSITION
BUTTON
1.375
(34.93)
15
.660
(16.76)
SEE MOUNTING
BUSHING AND
MOUNTING HARDWARE DRAWINGS FOR DETAIL
.281 MAX.
(7.14)
OPEN POSITION
CODES 1 & 4
.250
(6.35)
CODE 6
.312 TYP.
(7.92)
.85
(21.6)
.156
(3.96)
.187
(4.75)
#6-32 SCREW
& LOCK WASHER ASSEMBLY
1.375
(34.93)
.440
(11.18)
.850
(21.59)
.425
(10.80)
.415
(10.54)
.250 (6.35) x .032 (.81)
QUICK CONNECT TERMINALS
A
C & D
Terminal Options
3
Catalog 1308242
Issued 3-03 (PDF Rev. 5-10)
Revised 5-10
www.tycoelectronics.com
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Dimensions are shown for reference
purposes only. Specifications and
availability subject to change.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080208
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
M
ounting Metal Plastic Metal Metal
B
ushing Knurled Knurled Hex Lock
C
ode Nut Nut Nut Washer
1 55-010A – 55-011A 88-021B
4
•–55-001B 88-002A
6
55-008A – 55-001D 88-006K
7
55-008A 1423696-2 55-001D 88-006K
M
ounting Hardware
B
A
FLAT
A
B
S
TRAIGHT KNURL
2
4 PITCH
A
LTERNATE TEETH TWISTED
IN OPPOSITE DIRECTIONS
B
A
.440 - .450 DIA.
(11.2 - 11.4)
7/16-28 THREAD
(SILVER)
15/32-32 THREAD
(BLACK)
.300
(7.62)
.465
(11.81)
3/8-24 THREAD
(SILVER)
Recommended Cutout
.470 - .480 DIA.
(11.9 - 12.2)
.370 - .380 DIA.
(9.4 - 9.7)
.465
(11.81)
3/8-24 THREAD
(BLACK)
.370 - .380 DIA.
(15.0 - 15.3)
Mounting Hardware Dimensions
Mounting Hardware Ordering Information
Mounting Bushing
• 55-010B (silver) 55-010E (black)
Hex Nut
Knurled Nut
Lockwasher
Type 1
Type 4
Type 6
Metal Metal Plastic Metal
D
imension Hex Nut Knurled Nut Knurled Nut Lockwasher
3
/8” .556 (14.12) .562 (14.27) .74 (18.8) .562 (14.27)
A
. 7/16” .625 (15.88) .625 (15.88) – .540 (13.72)
1
5/32” .556 (14.12) .625 (15.88) – .600 (15.24)
3
/8” .085 (2.16) .078 (1.98) .126 (3.2) .018 (.457)
B
. 7/16” .111 (2.82) .125 (3.18) – .022 (.559)
1
5/32” .078 (1.98) .125 (3.18) – .018 (.457)
Type 7
Optional Protective Boot
Silicone rubber boot is bonded to integral alumimum nut.
1-1423696-5
Black boot for W58 with 3/8”-24
bushing.
.63 DIA.
(
16.0)
.622
(15.8)
Optional Bottom Marking of Rating
This is available on a special order basis. Consult factory for details.
© 2010 by Tyco Electronics Corporation. All Rights Reserved.
P&B, Potter & Brumfield, TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors.
Disclaimer:
While Tyco Electronics and its affiliates referenced herein have made every
reasonable effort to ensure the accuracy of the information contained in
this document, Tyco Electronics cannot assure that this information is error
free. For this reason, Tyco Electronics does not make any representation or
offer any guarantee that such information is accurate, correct, reliable or
current. Tyco Electronics reserves the right to make any adjustments to
the information at any time. Tyco Electronics expressly disclaims any
implied warranty regarding the information contained herein, including, but
not limited to, the implied warranties of merchantability or fitness for a
particular purpose. Tyco Electronics‘ only obligations are those stated in
Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics
will in no case be liable for any incidental, indirect or consequential
damages arising from or in connection with, including, but not limited to,
the sale, resale, use or misuse of its products. Users should rely on their
own judgment to evaluate the suitability of a product for a certain purpose
and test each product for its intended application.
In case of any potential ambiguities or questions, please don’t hesitate to
contact us for clarification.
P1-P3

W58-XB1A4A-25

Mfr. #:
Buy W58-XB1A4A-25
Manufacturer:
TE Connectivity
Description:
Circuit Breakers 25A PUSH TO RESET
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet