158X105K Datasheet 158X224K, 158X334, 158X684 | P1-P2

158X Series Type X2 Suppressor Capacitors

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

• Radial Leads

in Two Lengths

• UL and CSA Approved

• Flame Retardant Case

Meets UL94V-0

• Potting End Fill

Meets UL94V-0

• Used in applications where

damage to the capacitor will

not lead to the danger of

electrical shock

• Lead Material

Tinned Copper Clad Steel

GENERAL

SPECIFICATIONS

Operating Temperature:

-40 °C to +100 °C

Voltage Range:

275/250 VAC, 60 Hz

Capacitance Range:

0.01 µF to 2.2 µF

Capacitance Tolerance:

±20% (Standard)

±10% (Special)

Dissipation Factor (DF)

tgδ 0.01 Max at 1,000 ± 100kHz

Agency Approvals Outline Dimensions

Insulation Resistance (IR)

(@ 500 VDC and 20 °C)

Terminal to Terminal:

≤0.33µF 15,000 MΩ

min

≥0.47µF 5,000 MΩ x µF min

Both Terminals to Body:

100,000 MΩ min

Maximum Pulse Rise Time

Safety Agency Standard File Number

UL UL-60384-14 E171988

CSA C22 2, No. 1-98/No.8 (250VAC) 1572961

VDE

EN 60384-14 40018720

SEMKO EN 60384-14 1112778

NEMKO EN 60384-14 P10213462

Metallized Polyester / Radial Leads

µF V/µs µF V/µs

.010 2800 0.22 1200

.022 2400 0.47 1000

.033 2400 0.68 1000

.047 2000 1.00 800

.068 2000 1.50 800

.100 1600 2.20 600

Ratings

Catalog

Part Number

Cap

(µF)

Inches Millimeters

Length

Thickness

Height

Spacing

Ød

Length

Thickness

Height

Spacing

Ød

158X103 0.010 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X123 0.012 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X153 0.015 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X183 0.018 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X223 0.022 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X273 0.027 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X333 0.033 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6

158X393 0.039 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8

158X473 0.047 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8

158X563 0.056 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8

158X683 0.068 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8

158X823 0.082 0.669 0.256 0.591 0.591 0.031 17.0 6.5 15.0 15.0 0.8

158X104 0.100 0.669 0.315 0.591 0.591 0.031 17.0 8.0 15.0 15.0 0.8

158X124 0.120 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8

158X154 0.150 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8

158X184 0.180 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8

158X224 0.220 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8

158X274 0.270 1.181 0.354 0.669 1.083 0.031 30.0 9.0 17.0 27.5 0.8

158X334 0.330 0.984 0.394 0.768 0.886 0.031 25.0 10.0 19.5 22.5 0.8

158X394 0.390 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8

158X474 0.470 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8

158X564 0.560 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8

158X684 0.680 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8

158X824 0.820 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0

158X105 1.000 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0

158X125 1.200 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0

158X155 1.500 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0

158X185 1.800 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0

158X225 2.200 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0

NOTE: If ±10% tolerance is required, add 'K' to end of Catalog Number

NOTE: Parts are normally supplied with leads 30mm minimum

To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number.

RoHS Compliant

158X Series Type X2 Suppressor Capacitors

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and

data (collectively, the “Information”) in this datasheet or other publication are subject to change. The

customer is responsible for checking, conrming and verifying the extent to which the Information con-

tained in this datasheet or other publication is applicable to an order at the time the order is placed. All

Information given herein is believed to be accurate and reliable, but it is presented without any guaran-

tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability

for certain applications are based on the knowledge that the Cornell Dubilier company providing such

statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards

as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-

tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specic customer application, use, storage,

transportation, or operating environment. The Information is intended for use only by customers who

have the requisite experience and capability to determine the correct products for their application. Any

technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference

to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),

and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although

Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design

and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should

employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies

or other appropriate protective measures) in order to ensure that the failure of an electrical component

does not result in a risk of personal injury or property damage. Although all product-related warnings,

cautions and notes must be observed, the customer should not assume that all safety measures are indi-

cated in such warnings, cautions and notes, or that other safety measures may not be required.

P1-P2

158X105K

Mfr. #:

Buy 158X105K

Manufacturer:

Cornell Dubilier (CDE)

Description:

Film Capacitors 1uF 250V 10%

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

158X105K

158X105K

Products related to this Datasheet