Type 12 Mild Steel Pushbutton Enclosures
1489 Series
Hinged Cover
Application
Designed to accept standard heavy duty oil tight pushbuttons, switches and
pilot lights.
Provides protection from dirt, dust, oil and water.
Standards
UL 508 Type 12
CSA Type 12
JIC standard EGP-1-1967, EMP-1-1967
Complies with
NEMA Type 12
IEC 60529, IP54
Appropriate components are required to maintain these standards.
Construction
Formed 14 gauge steel.
Smooth continuously welded seams.
Welded brackets provide for enclosure mounting.
Continuously hinged cover is secured with captive, plated steel screws
which fasten into threaded sealed wells.
Oil resistant gasket and adhesive.
Weldnuts are provided for mounting inner panels.
A removable 14 gauge inner panel is included.
A bonding stud is provided on the door and a grounding stud is provided in
the enclosure.
Finish
Cover and enclosure are phosphatized and finished in ANSI 61 gray powder
coating.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.