OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

PGB1040805MR

P1-P2
Surface Mount Polymeric ESD Suppressors
PulseGuard
®
Suppressors
208
www.littelfuse.com
PGB1 Series Lead-Free 0805 ESD Suppressor
Product Overview
PulseGuard ESD Suppressors help protect sensitive electronic
equipment against electrostatic discharge (ESD). They supplement the
on-chip protection of integrated circuitry and are best suited for low-
voltage, high-speed applications where low capacitance is important.
Data ports utilizing such high-speed protocols as USB 2.0, IEEE1394,
HDMI and DVI can benefit from this new technology. PulseGuard
suppressors use polymer composite materials to suppress fast-rising
ESD transients (as specified in IEC 61000-4-2 and MIL-STD-883E),
while adding virtually no capacitance to the circuit.
Features
• Lead-Free
• Ultra-low capacitance
• Low leakage current
• Fast response time
• 4-lines of protection
• Bi-directional
• Withstands multiple ESD strikes
• Based on industry standard 2012 package
• Compatible with pick-and-place processes
• Available in 1,000 and 5,000 piece reels (EIA-RS481)
Typical Applications
• HDTV Hardware
• Laptop/Desktop Computers
• Network Hardware
• Computer Peripherals
• Digital Cameras
• External Storage
• Set-Top Boxes
Ordering Information
CATALOG NUMBER PIECES PER REEL
PGB1040805MR 1,000
PGB1040805NR 5,000
Design Consideration
Because of the fast rise-time of the ESD transient, placement of
PulseGuard suppressors is a key design consideration. To achieve
optimal ESD suppression, the devices should be placed on the circuit
board as close to the source of the ESD transient as possible. Install
PulseGuard suppressors directly behind the connector so that they are
the first board-level circuit component encountered by the ESD transient.
They are connected from signal/data line to ground.
2.03 (.080") TYP
0.203
(.008") TYP
1.27
(.050") TYP
NOTE: When wave soldering, the gap between pads should be
covered with photo-imageable solder mask to prevent bridging
between terminations under the component. Also the spacing
between the ground contacts should be increased from
.635mm (.025") to .889 (.035").
Reflow Solder
0.71 (.028")
1.27
(.050")
0.51 (.020")
0.635 (.025")
0.74
(.029")
0.74
(.029")
0.279
(.011")
Equivalent Circuit
Reference Dimensions:
2
6
1
4
3
5
2
6
1
4
3
5
Sn
0.406 (.016") TYP
0.127
(.005") TYP
Pb
RoHS
PulseGuard
®
Suppressors
Surface Mount Polymeric ESD Suppressors
209
www.littelfuse.com
++++
+
++
T
w
D
s
P
h
D
d
P
s
P
w
P
d
C
t
T
t
Carrier Tape Specifications
Parts are delivered on 7" (178mm) reel, paper carrier tape
DESCRIPTION
C
t
- Cover tape thickness
D
d
- Drive hole diameter
D
s
- Drive hole spacing
P
d
- Pocket depth
P
h
- Pocket height
Ps - Pocket spacing
P
w
- Pocket width
T
t
- Carrier tape thickness
T
w
- Carrier tape width
MEASUREMENT (MM)
0.06
1.50
4.00
0.58
2.21
4.00
1.45
0.65
8.00
** Note: 1,000 fF = 1 pF
Frequency (GHz)
Capacitance (fF)
60
50
1.0
70
40
2.01.50.5
Capacitance vs. Frequency
Electrical Characteristics
ESD Capability
IEC 61000-4-2 Direct Discharge ....................................................8kV
IEC 61000-4-2 Air Discharge .......................................................15kV
Trigger Voltage
1
.....................................................................500 V, typical
Clamping Voltage
1
..................................................................150V, typical
Rated Voltage ........................................................................24VDC, max
Capacitance
2
................................................................................0.055 pF
Response Time
1
................................................................................< 1ns
Leakage Current
3
.............................................................................< 1nA
ESD Pulse Withstand
4
..........................................1,000 pulses, minimum
Notes:
1. Trigger and clamping voltage measured per IEC 61000-4-2, 8kV direct
discharge method.
2. Capacitance measured at 1MHZ.
3. Leakage current measured at 6VDC.
4. Pulse Withstand- some shifting in characteristics may occur when tested
over multiple pulses at a very rapid rate.
Environmental Specifications
Operating Temperature: -65°C to +125°C.
Moisture Resistance, steady state: MIL-STD-833, method 1004.7,
85% RH, 85°C, 1000hrs.
Thermal Shock: MIL-STD-202, Method 107G, -65°C to 125°C,
30 min cycle, 10 cycles.
Vibration: MIL-STD-202F, Method 201A, (10 to 55 to 10Hz,
1 min. cycle, 2grs each in X-Y-Z)
Physical Specifications
Materials:
Body: Glass Epoxy
Terminations: 100% Copper/Nickel/Tin
Solderability: MIL-STD-202, Method 208 (95% coverage)
Soldering Parameters:
Wave Solder – 260°C, 10 seconds maximum.
Reflow Solder – 260°C, 30 seconds maximum.
Packaging Specifications
8mm Tape and Reel per EIA-RS481-1 (IEC 286, part3); 1,000 pieces per
reel, add packaging suffix, MR; 5,000 per reel, add packaging suffix NR.
PGB1 Series Lead-Free 0805 ESD Suppressor
Pb
RoHS
4
PULSEGUARD
®
SUPPRESSORS
P1-P2

PGB1040805MR

Mfr. #:
Buy PGB1040805MR
Manufacturer:
Littelfuse
Description:
ESD Suppressors / TVS Diodes PGB1040805MR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet