OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CCSO-914X-250.000

P1-P3P4-P4
CCSO-914X
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
3.3 & 5.0 Volt
C
12730 Commonwealth Drive Fort Myers, Florida 33913
Phone: 239-561-3311 800-237-3061
Fax: 239-561-1025 www.crystek.com
CRYSTEK
C OR P OR A T IO N
Date: 20-Feb-2017
Rev: T
Page 1 of 4
Model CCSO-914X is a SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal
technology provides low-noise and low-jitter performance with true sinewave output.
Features include -138 dBc/Hz phase noise at 10 kHz offset at 1 GHz, 3.3V & 5V input
voltage available, -40°C to +85°C operating temperature, FR5 PCB and 9×14 mm SMT
package. The oscillator has no sub-harmonic and the second harmonic is typically -20 dBc.
Applications include:
Analog to Digital Converters (A/D Converters), System Clock for Network Clock Generator/
Synchronizer, Clock for DDS, Test and Measurement, Avionics, Point-to-Point Radios, and
Multi-point Radios.
Ultra-Low Phase Noise SAW Clock
Frequency Range:
245.760 MHz to 1090 MHz
CCSO-914X3-250.000
CCSO-914X
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
3.3 & 5.0 Volt
C
12730 Commonwealth Drive Fort Myers, Florida 33913
Phone: 239-561-3311 800-237-3061
Fax: 239-561-1025 www.crystek.com
CRYSTEK
C OR P OR A T IO N
Date: 20-Feb-2017
Rev: T
Page 2 of 4
Frequency Range:
Temperature Range:
Storage:
Input Voltage: (option 3)
(standard)
Frequency vs Temperature (Typical):
Input Current:
Output:
Output Power: (3.3V)
(5.0V)
Start-Up Time:
2
nd
Harmonic:
Sub-Harmonics:
Phase Noise Typical @ 1 GHz:
1kHz
10kHz
100kHz
1MHz
10MHz
G-sensitivity:
245.760 MHz to 1090 MHz
-40°C to +85°C
-45°C to 90°C
3.3V ± 0.165V
5.0V ±0.25V
±200ppm (-40/85)
±150ppm (0/70)
25mA Typical, 35mA Max
True SineWave
+5dBm Min into 50 Ω Load
+8dBm Min into 50 Ω Load
2mSec Typical, 10mSec Max
-20dBc Typical, -15dBc Max
None
-110 dBc/Hz
-138 dBc/Hz
-150 dBc/Hz
-160 dBc/Hz
-170 dBc/Hz
0.9×10
-9
per g
SUGGESTED PAD LAYOUT
0.050
(1.27)
0.050
(1.27)
0.200
(5.08)
0.280
(7.11)
0.200
(5.08)
0.040
(1.01)
0.040
(1.02)
1
34
2
0.180
(4.57)
0.090
(2.29)
0.090
(2.29)
0.100
(2.54)
0.125
(3.18)
0.280
(7.11)
0.210 5.33
0.135 3.43
Standard
Option L
inches mm
Table A
Package Height Options
See
Table A
0.560
(14.2)
0.360
(9.14)
0.560
(14.2)
CRYSTEK
Part Number
Frequency
Date Code
Pad Connection
1
2
3
4
N/C
GND
Output
Vdd
Specifications subject to change without notice.
CCSO-914X
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
3.3 & 5.0 Volt
C
12730 Commonwealth Drive Fort Myers, Florida 33913
Phone: 239-561-3311 800-237-3061
Fax: 239-561-1025 www.crystek.com
CRYSTEK
C OR P OR A T IO N
Date: 20-Feb-2017
Rev: T
Page 3 of 4
RECOMMENDED REFLOW SOLDERING PROFILE
217°C
200°C
260°C
150°C
90 Secs. Max.
TEMPERATURE
Ramp-Up
3°C/Sec Max.
Preheat
180 Secs. Max.
8 Minutes Max.
260°C for
10 Secs. Max.
Critical
Temperature Zone
Ramp-Down
6°C/Sec.
NOTE: Reflow Profile with 240°C peak also acceptable.
ConditionsParameter
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2003
MIL-STD-202, Method 215
Mechanical Shock
Mechanical Vibration
Solderability
Solvent Resistance
MIL-STD-202, Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Resistance to Soldering Heat
Thermal Shock
Moisture Resistance
Frequency vs Temperature
Available Frequencies (MHz):
Custom Frequencies Available with NRE Fee
245.760
250.000
433.920
500.000
622.080
800.000
916.000
1000.000
1090.000
Similar Product in 5×7.5mm Package
Click Here
Crystek Part Number Guide
#1 Crystek Saw Osc.
#2 Model 914 with -40/85°C Temperature Range
#3 (3 = 3.3Volts) (Blank = 5 Volts)
#4 Height (L = 0.135") (Blank = 0.210")
#5 Frequency in MHz: 3 or 6 decimal places
CCSO - 914X 3 L - 1000.000
#5#3#1 #2 #4
P1-P3P4-P4

CCSO-914X-250.000

Mfr. #:
Buy CCSO-914X-250.000
Manufacturer:
Description:
VCSO Oscillators 250.00MHz 5Volt -40C +85C
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet