Evaluation Board User Guide
UG-246
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for the ±300°/sec, Single-Axis Digital Output Rate Gyroscope
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 4
GENERAL DESCRIPTION
e EVAL-ADXRS453Z-V is a simple breakout board that facili-
tates quick evaluation of the performance of the ADXRS453
±300°/sec digital output single-axis rate gyroscope in an SMT-
compatible vertical mount package.
e EVAL-ADXRS453Z-V has two sets of 5-lead, 0.1-inch pin
spacing headers that allow electrical connections to be made
between the ADXRS453 and the existing system. Four mount-
ing holes are also provided for mechanical at
tachment of the
EVAL-ADXRS453Z-V to the application. An external host
processor is required for communication to the ADXRS453
gyroscope.
e dimensions of the EVAL-ADXRS453Z-V are 1.3 inch ×
1.3 inch (33 mm × 33 mm) with two sets of mounting holes.
e outer set of holes is 0.125 inch (3.175 mm) in diameter and
arranged in a 0.945 inch × 0.945 inch (24 mm × 24 mm) square
around the center of the printed circuit board (PCB). e inner
set of mounting holes are 0.120 inch (3.05 mm) in diameter and
arranged in a 0.575 inch × 0.575 inch (14.6 mm × 14.6 mm)
square around the center of the PCB.
CIRCUIT DESCRIPTION
e board layout and schematic of the EVAL-ADXRS453Z-V
are shown in Figure 1 and Figure 2, resp
ectively. A list of parts
that are populated on the board is shown Table 1.
Pin names are indicated on the schematics and board layout, as
well as on the board itself, for easy identication. For additional
information, see the ADXRS453 data sheet.
EVAL-ADXRS453Z-V BOARD LAYOUT
09681-002
Figure 1. Dimensions shown in Inches.
1.300
1.300
