DF6A-1822PC(05) Datasheet DF6-10P-3.96C, DF6-1P-3.96C, DF6-5P-3.96C | P1-P3

B129

3.96mm Pitch Connector Directly Mounted on Board

DF6 Series

■Features

1. Service Efficiency Up

Conventional thick cables are directly mounted on the

board piece by piece, but connecterization has achieved

soldering services in a batch. This product enhances

soldering service efficiency.

2. Miniaturization

This product achieves miniaturization for thick cables.

Mounting height on board : 7.5mm

Width : 5.0mm

3. Board Prefixed Mechanism

Since the connector is softly press-fitted to the board for

insertion, it can be prefixed to the board.

■Applications

Secondary power supply units for various equipment

Prefixed mechanism

Height: 7.5mm

width: 4.6mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

B130

DF6 Series●3.96mm Pitch Connector Directly Mounted on Board

■Product Specifications

Rating

Current rating

(Note 1)

Voltage rating

AWG 18 : 5A

Cable size AWG 20 : 4A

AWG 22 : 3A

300V AC

Operating Temperature Range

Operating Moisture Range

Storage Temperature Range

Storage Humidity Range

-35 to +85ç (Note 1)

40 to 80%

-10 to +60ç (Note 2)

40 to 70% (Note 2)

Note 1: The rated current will be changed according to cable sizes for use.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 4: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for

a specific part number shown.

Item Specification Condition

1.Insulation Resistance 1000M ohms min. 500V DC

2.Withstanding voltage No flashover or insulation breakdown. 1500V AC/1 minute

3.Contact Resistance 15m ohms max. 100mA

4.Vibration No damage, cracks, or parts looseness.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

5.Humidity (Steady state) No damage, cracks, or parts looseness.

96 hours at temperature of 40ç and humidity of 90% to 95%

6.Temperature Cycle No damage, cracks, or parts looseness.

(-55ç: 30 minutes ➝15 to 35ç: 10 minutes➝85ç: 30 minutes➝ 5 to 35ç: 10 minutes ) 5 cycles

Resistance to Soldering heat

No deformation of components affecting performance.

Flow: 250ç for 10 seconds

Manual soldering: 300ç for 3 seconds

■Material

Product Part Material Finish Remarks

Crimping Plug Insulator Polyamide White UL94V-0

Crimping Contact for Plug Brass Copper Alley Tin plated

________

■Ordering Information

DF6 - * P - 3.96 C

qewrt

r Contact pitch: 3.96mm

t C: Crimping plug

q Series Name : DF 6

w Number of contacts: 1~8, 10

e Connector type

P: Plug

●Crimping Plug

DF6A - 1822 PCF

qwe

e Packaging type

PCF: Plug contact, reel packaging

SC: Plug contact, bag packaging

q Applicable cable type

None : Jacket dia. 1.5mm to 2.2mm

UL 1007

A : Jacket dia. 2.2mm to 2.9mm

UL 1015

w Applicable cable size

1822 : AWG#18~#22

●Crimping Contact

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

B131

DF6 Series●3.96mm Pitch Connector Directly Mounted on Board

■Precrimping Plug

Photo: Contact Inserted

■Crimping Contact

Part Number CL No.

Number of Contacts

A B RoHS

DF6- 1P-3.96C 546-0001-1 1 4.92

_____

DF6- 2P-3.96C 546-0002-4 2 8.88 3.96

DF6- 3P-3.96C 546-0003-7 3 12.84 7.92

DF6- 4P-3.96C 546-0004-0 4 16.80 11.88

DF6- 5P-3.96C 546-0005-2 5 20.76 15.84 YES

DF6- 6P-3.96C 546-0006-5 6 24.72 19.80

DF6- 7P-3.96C 546-0007-8 7 28.68 23.76

DF6- 8P-3.96C 546-0008-0 8 32.64 27.72

DF6-10P-3.96C 546-0011-5 10 40.56 35.64

TypeItem Part Number CL No. Applicable Contact

Applicator

AP105-DF6-1822P 901-4505-9 DF6 -1822PCF

(

)

AP105-DF6A-1822P 901-4520-2 DF6A-1822PCF

(

)

Press unit CM-105 901-0005-4

________

Manual crimping

DF6 -TA1822HC 550-0174-9 DF6 -1822PC

(

)

tool

DF6A-TA1822HC 550-0222-0 DF6A-1822PC

(

)

Extraction tool DF-C-PO(A) 550-0170-8 DF6/DF6A-1822PC

(

)(

)

Contact View for Insertion

Note: A packaging quantity is delivered by the bag unit (100 pcs.).

Note 1. The applicable cable conductor is a tin plated and annealed copper wire.

Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department.

Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products.

●Slip length

DF6-1822PC (F): 2.1mm to 2.6mm

DF6A-1822PC (F): 2.3mm to 2.8mm

●Applicable through-hole: 1.8

+0.15

BApplicable Crimping Tools

Applicable Cable

Part Number CL No.

Packaging Type

Quantity A B C

UL style Jacket dia. AWG size

Contact Construct

DF6 -1822PCF(05)

546-0009-3-05 Reel 5,000

1007

1.5 to 2.2mm

AWG 18

34 cores/0.18mm

10.2 1.5 1.2

DF6 -1822PC(05)

546-0010-2-05 Bag 100

AWG 20

21 cores/0.18mm

DF6A-1822PCF(05)

546-0013-0-05

Reel

3,000

1015

2.2 to 2.9mm

AWG 22

17 cores/0.16mm

10.5 1.7 1.4

DF6A-1822PC(05)

546-0014-3-05 Bag 100

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

P1-P3 P4-P4

DF6A-1822PC(05)

Mfr. #:

Buy DF6A-1822PC(05)

Manufacturer:

Hirose Electric

Description:

Headers & Wire Housings MALE CRIMP CONTACT AWG #18 - #22

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

DF6A-1822PC(05)

DF6A-1822PC(05)

Products related to this Datasheet