Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HM Power Header
2 mm Type A, 110/44/4 Signal/Ground/Power Contacts, 5 Rows, Straight HM Series
Physical
Performance
Environmental
Insulation
Material:
High Temperature Thermoplastic (LCP)
Flammability:
UL 94V-0
Contact
Material:
Copper Alloy
Plating:
See Ordering Information
Marking:
3M Logo, Part Number, Revision, Date Code
Mechanical
Normal Force (Nominal):
0.57 N [58 g] Signal, 0.98 N [100 g] Power
Engagement Force (Nominal):
0.32 N [33 g] Signal, 1.42 N [145 g] Power
Separation Force (Nominal):
0.20 N [20 g] Signal, 0.89 N [91 g] Power
Wipe (Nominal, Shortest Contact):
2.67 mm [0.105 in] Signal, 1.93 mm [.076 in] Power
Durability:
250 cycles with TR40B plating (Lubricated)
Application:
This module is suitable for stand-alone use with pin lengths up to 6.80 mm.
Limited capture of 0.75 mm in longitudinal and 1.00 mm in transverse directions.
Electrical
Current Rating (Fully Loaded):
1 A at 70qC Signal, 8.25 A @ 70qC Power
Insulation Resistance:
1 x 10
4
M: at 100 V
DC
Withstanding Voltage:
750 V
RMS
Temperature Rating:
-55qC to +125qC
Process Rating:
Maximum 260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
TS-2089-02
Sheet 1 of 3
Date Modified: April 4, 2007
• Modular/scalable format IEC 61076-4-101
• Press-fit or solder tail version
• 63 mated lines per linear inch
• Four integrated 8.25 A power blades
• Ships with protective cap, which also serves as an
insertion tool
• End-to-end stackable with 5 row 3M™ MetPak™
CP2, HM and HSHM products
• See Regulatory Information Appendix (RIA)
for chemical compliance information
UL File No.: E68080
MetPak is a trademark of 3M Company.
