Page 2 Page 3
BBA-322-A ELECTRICAL SPECIFICATIONS
Parameter Designation Min. Typical Max. Units Notes
POWER SUPPLY
Operating Voltage V
CC
4.8 – 5.2 VDC 1
Supply Current I
CC
– 35.0 65.0 mA –
AMPLIFIER SECTION
Frequency Range F
C
DC – 3,000 MHz 2
Gain: – -50 – +50 kHz –
@ 100MHz – 21.0 – dB –
@ 1,000MHz – 20.0 – dB –
@ 2,000MHz – 17.0 – dB –
@ 3,000MHz – 14.0 – dB –
Gain Ripple – – ±2 – dB 3
Noise Figure – – 3.8 – dB 4
Input VSWR – – 2.3 – – 5
Output VSWR – – 2.1 – – 5
Output IP3 – – +22.5 – dBm 6
Output P
1dB
– – +11.2 – dBm 4
Reverse Isolation – – 20 – dB 4
ANTENNA PORT
RF Input Impedance R
IN
–50–Ω –
ENVIRONMENTAL
Operating Temperature Range – -40 – +85
°C–
1. 5.2V to 12V range is possible with the appropriate current-limiting resistor.
2. T = 25°C, I
CC
= 35mA.
3. 100MHz to 2,000MHz.
4. At 2,000MHz.
5. In a 50Ω system, DC to 3,000MHz.
6. At 2,000MHz ± 50kHz, P
TONE
= -18dBm.
Notes
ABSOLUTE MAXIMUM RATINGS
Supply Voltage V
CC
+4.8 to +5.2 VDC
Supply Current 65 mA
RF Input +15 dBm
Operating Temperature 0 to +70 °C
Storage Temperature -60 to +150 °C
Soldering Temperature +225°C for 10 seconds
*NOTE* Exceeding any of the limits of this section may lead to permanent
damage to the device. Furthermore, extended operation at these maximum
ratings may reduce the life of this device.
1. 5.2V to 12V range is possible with the appropriate current-limiting resistor.
2. T = 25°C, I
CC
= 65mA.
3. 100MHz to 2,000MHz.
4. At 2,000MHz.
5. In a 50Ω system, DC to 4,000MHz.
6. At 1,000MHz ± 50kHz, P
TONE
= -10dBm.
7. At 1,000MHz.
Notes
BBA-519-A ELECTRICAL SPECIFICATIONS
Parameter Designation Min. Typical Max. Units Notes
POWER SUPPLY
Operating Voltage V
CC
4.8 – 5.2 VDC 1
Supply Current I
CC
– 60.0 65.0 mA –
AMPLIFIER SECTION
Frequency Range F
C
10 – 4,000 MHz 2
Gain: – -50 – +50 kHz –
@ 100MHz – 18.5 – dB –
@ 1,000MHz – 17.5 – dB –
@ 2,000MHz – 15.5 – dB –
@ 3,000MHz – 13.5 – dB –
@ 4,000MHz – 12.5 – dB –
Gain Ripple – – ±2 – dB 3
Noise Figure – – 4.8 – dB 4
Input VSWR – – 2.1 – – 5
Output VSWR – – 1.8 – – 5
Output IP3 – – +33 – dBm 6
Output P
1dB
– – +18.5 – dBm 7
Reverse Isolation – – 20 – dB 4
ANTENNA PORT
RF Input Impedance R
IN
–50–Ω –
ENVIRONMENTAL
Operating Temperature Range – -40 – +85
°C–
ABSOLUTE MAXIMUM RATINGS
Supply Voltage V
CC
+4.8 to +5.2 VDC
Supply Current 120 mA
RF Input +13 dBm
Operating Temperature 0 to +70 °C
Storage Temperature -60 to +150 °C
Soldering Temperature +225°C for 10 seconds
*NOTE* Exceeding any of the limits of this section may lead to permanent
damage to the device. Furthermore, extended operation at these maximum
ratings may reduce the life of this device.
*CAUTION*
This product incorporates numerous static-sensitive components.
Always wear an ESD wrist strap and observe proper ESD handling
procedures when working with this device. Failure to observe this
precaution may result in module damage or failure.
*NOTE* The purchaser of this device should be aware that approvals may be
required by applicable governing bodies for systems producing RF energy. It
is the responsibility of the user to determine and adhere to the appropriate
regulations for the region in which operation is intended.
