Product Brief
SPIDER+ New SPI driver family
Low-side, high-side and flexible devices (9 products)
The 16-bit Serial Peripheral Interface (SPI) is used to control and diagnose
the device and the loads. Input and output status registers in combination
with the open load detection allows the diagnosis of the entire path from
microcontroller to the loads.
In limp home (fail safe mode) the input pins (IN0 + IN1) are directly routed
to output channels 2 and 3. When the IDLE pin is “low”, the 2 output chan-
nels can be operated even w/o the presence of the digital supply voltage
V
DD
, resp. the microcontroller.
SPIDER+ product overview
Product SOP Nominal load current
(@ T
amb
= 85° C)
[mA]
R
DS(on)
(typ @ 25 °C)
[Ω]
LED packet Number of
flex channels
Number of
HS channels
Number of
LS channels
Package Order number
TLE75008-EMD Released 330 1.0 8 PG-SSOP24-EP SP001082100
TLE75004-ELD Released 470 1.0 4 PG-SSOP14-EP SP001082104
TLE75080-EMD 07/2016 330 1.0 8 PG-SSOP24-EP SP001082110
TLE75080-EMH 07/2016 330 1.0
8 PG-SSOP24-EP SP001082246
TLE75242-EMD 08/2016 330 1.0 2 4 2 PG-SSOP24-EP SP001117344
TLE75242-EMH 08/2016 330 1.0
2 4 2 PG-SSOP24-EP SP001117342
TLE75602-EMD Released 330 1.0 6 2 PG-SSOP24-EP SP001082102
TLE75602-EMH Released 330 1.0
6 2 PG-SSOP24-EP SP001082252
TLE75620-EMT Q4/2016 330 1.0
6 2 PG-SSOP24-EP SP001117340
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2016 Infineon Technologies AG.
All Rights Reserved.
Order Number: B127-I0168-V2-7600-EU-EC-P
Date: 02 / 2016
Please note!
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY AND
ANY INFORMATION GIVEN HEREIN SHALL IN NO EVENT BE
REGARDED AS A WARRANTY, GUARANTEE OR DESCRIPTION OF
ANY FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF OUR
PRODUCTS OR ANY SUITABILITY FOR A PARTICULAR PURPOSE.
WITH REGARD TO THE TECHNICAL SPECIFICATIONS OF OUR
PRODUCTS, WE KINDLY ASK YOU TO REFER TO THE RELEVANT
PRODUCT DATA SHEETS PROVIDED BY US. OUR CUSTOMERS AND
THEIR TECHNICAL DEPARTMENTS ARE REQUIRED TO EVALUATE
THE SUITABILITY OF OUR PRODUCTS FOR THE INTENDED
APPLICATION.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT AND/OR
THE INFORMATION GIVEN HEREIN AT ANY TIME.
Additional information
For further information on technologies, our products, the
application of our products, delivery terms and conditions
and/or prices, please contact your nearest Infineon Technologies
oice (www.infineon.com).
Warnings
Due to technical requirements, our products may contain
dangerous substances. For information on the types in question,
please contact your nearest Infineon Technologies oice.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any life-
endangering applications, including but not limited to medical,
nuclear, military, life-critical or any other applications where a
failure of the product or any consequences of the use thereof
can result in personal injury.
Application diagram example for TLE75008-EMD
V
DD
Batt
R
IN
IN0_LH
IN1_LH
R
VDD
MCU
TLE75008-EMD
GPO
V
DD
V
DD
V
S
IN0
IN1
IDLE
SO
GND
SI
SCLK
OUT7_LS
OUT6_LS
OUT5_LS
OUT4_LS
OUT3_LS
OUT2_LS
OUT1_LS
OUT0_LS
CSN
R
IN
Z
VS
GPO
R
IDLE
R
LH
Limp
Home
SPI
Loads
GPO
R
SO
GPI
R
SI
GPO
R
SCLK
GPO
R
DS
GPO
C
VDD
C
VS
C
OUT
C
OUT
C
OUT
C
OUT
C
OUT
C
OUT
C
OUT
C
OUT
Z
OUT7
Z
OUT6
Z
OUT5
Z
OUT4
Z
OUT3
Z
OUT2
R
OUT1