RFX8051B

1
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
RFX8051B
Production Data Sheet
CMOS 5GHz WLAN 802.11ac RFeIC WITH PA, LNA AND SPDT
Description
RFX8051B is a highly integrated, single-chip, single-die RFeIC (RF Front-end
Integrated Circuit) which incorporates key RF functionality needed for IEEE
802.11a/n/ac WLAN system operating in the 5.15-5.85GHz range. The RFX8051B
architecture integrates a high-efficiency high-linearity power amplifier (PA), a low
noise amplifier (LNA) with bypass, the associated matching network, LO rejection,
and harmonic filters all in a CMOS single-chip device.
RFX8051B has simple and low-voltage CMOS control logic, and requires minimal
external components. A directional coupler based power detect circuit is also
integrated for accurate monitoring of output power from the PA.
RFX8051B is assembled in an ultra-compact low-profile 3.0x3.0x0.55 mm 16-lead
QFN package, and is the ideal RF front-end solution for implementing 5GHz WLAN
in smartphones and other platforms.
Applications
802.11n/ac Wi-Fi Devices
Tablets / MIDs
Wi-Fi Media Gateways
Consumer Electronics
Notebook / Netbook / Ultrabook
Access Points / Routers
Set Top Boxes / Wireless IPTVs
Other 5GHz ISM Platforms
FEATURES
Excellent ESD Protection on All Pins
RF Ports are free of DC Voltage
All VDD Bias Pins have Internal RF Decoupling
Low Noise Figure for the Receive Chain
High Power Capability for Received Signals in
Bypass Mode
Full On-chip Matching Circuitry
Minimal External Components Required
50-Ohm Input / Output Matching
Market Proven CMOS Technology
3mm x 3mm x 0.55mm Small Outline 16L QFN
Package with Exposed Ground Pad
RoHS and REACH Compliant
16
5
15 14 13
6 7 8
9
10
11
12
NC
RX
NC
VDD
DET GND
LEN
GND
NC
VDD
NC
TXEN
RXEN ANTGND
TX
2
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
RFX8051B
Production Data Sheet
PIN ASSIGNMENTS:
Pin Number
Pin Name
Description
1, 3, 9, 11
NC
Internally Not Connected Can be connected to GND on PCB
2
RX
Output RF Port from LNA or Bypass DC Shorted to GND
4, 10
VDD
DC Supply Voltage
5
DET
Output Analog Voltage Proportional to the TX Antenna Power
6
TXEN
CMOS Logic Input to Control TX Enable
7, 12, 14, 17
GND
Ground Must Be Connected to GND on the PCB
8
TX
Input RF Port for TX Signals from the Transceiver DC Shorted to GND
13
ANT
Antenna Port RF Signal from the PA or RF Signal Applied to the LNA DC
Shorted to GND
15
RXEN
CMOS Logic Input to Control RX Enable
16
LEN
CMOS Logic Input to Control LNA Enable or Bypass Mode
PIN-OUT DIAGRAM:
16
5
15 14 13
6 7 8
9
10
11
12
NC
RX
NC
VDD
DET GND
LEN
GND
NC
VDD
NC
TXEN
RXEN ANTGND
TX
17
GND
(Top “See-Through” View)
3
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
RFX8051B
Production Data Sheet
ABSOLUTE MAXIMUM RATINGS:
Parameters
Units
Min
Max
Conditions
DC VDD Voltage Supply
V
0
3.9
All VDD Pins
DC Control Pin Voltage
V
0
3.6
All Control Pins
DC VDD Current
Consumption
mA
400
Through VDD Pins when TX is “ON”
TX RF Input Power
dBm
+7
ANT RF Input Power
dBm
+20
Bypass Mode
ANT RF Input Power
dBm
+5
RX Mode
Junction Temperature
o
C
150
Storage Ambient
Temperature
o
C
-40
+150
Appropriate care required according to
JEDEC Standards
Operating Ambient
Temperature
o
C
-40
+85
Moisture Sensitivity
MSL1
Note: Sustained operation at or above the Absolute Maximum Ratings for any one or combinations of the above
parameters may result in permanent damage to the device and is not recommended.
All Maximum RF Input Power Ratings assume 50-Ohm terminal impedance.
NOMINAL OPERATING CONDITIONS:
Parameters
Units
Min
Typ
Max
Conditions
DC VDD Voltage Supply (Note 1)
V
3.0
3.3
3.6
All VDD Pins
Control Voltage “High” (Note 2)
V
1.2
3.3
Control Voltage “Low”
V
0
0.3
DC Control Pin Current
Consumption
μA
1
DC Shutdown Current
μA
3
PA Turn On/Off Time
μsec
0.4
LNA Turn On/Off Time
μsec
0.4
Shut-Down and “ON” State
Switching Time
μsec
0.4
RF Port Impedance
ohms
50
TX, RX, ANT VDD Applied
ja (Note3)
o
C/W
46
jc
o
C/W
19
Note 1: For normal operation of the RFX8051B, VDD must be continuously applied to all VDD supply pins.
Note 2: If control voltage can exceed 1.8V, a 10K series resistor is recommended for the application circuit on each
control line.

RFX8051B

Mfr. #:
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Front End 5GHz 802.11a/n/ac RFeIC PA+LNA+SPDT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet