consumption. The heart of Grove - LoRa Radio 433MHz is ATmega168, a widely used
chip with very high-performance and low power consumption, especially suitable for this
grove module.
There we already integrated a simple wire antenna to receive signal, if the signal is too
weak to receive, don’t worry, the MHF connector next to the antenna is for adding a
second antenna which has MHF interface to gain more signal.
This is the 433MHz version, which can be used for 433MHz communication. You can
also find the version for 868MHz at Grove - LoRa Radio 868MHz.
Note:
Please keep the antenna vertical to the board and as straight as possible to make the
best performance.
Please avoid making any big metal object near the antenna and a metal cape is also not
recommended if you need to add a cape for your device.
Features
Using RFM95 module based on SX1276 LoRa®
Inputting voltage:5V/3.3V
~28mA(Avg) @+20dBm continuous transmit
~8.4mA(Avg)@standby mode
~20mA(Avg) @receive mode, BW-500kHz
Working Temperature:-20 – 70Ԩ
Communication Interface:UART
Simple wire antenna or MHF Connector for external high gain antenna
Working Frequency:433MHz
+20dBm - 100 mW Power Output Capability
Size:20*40mm
Copyright © 2008-2016 Seeed Development Limited All rights reserved