NJM2068
-
-
Ver.2011-03-18
■ ABSOLUTE MAXIMUM RATINGS(Ta=25°C)
PARAMETER SYMBOL RATING UNIT
Supply Voltage V
+
/V
-
±18 V
Differential Input Voltage Range V
ID
±30 V
Common Mode Input Voltage Range V
IC
±15 (Note1) V
Power Dissipation P
D
DIP8: 500
DMP8: 300
SSOP8: 250
SIP8: 800
mW
Operating Temperature Range Topr -20~+75 ºC
Storage Temperature Range Tstg -40~+125 ºC
(Note1) For supply voltage less than ±15V, the absolute maximum input voltage is equal to supply voltage.
■ RECOMMENDED OPERATING VOLTAGE(Ta=25°C)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Supply Voltage V
+
/V
-
±4 - ±18 V
■ ELECTRICAL CHARACTERISTICS(V
+
/V
-
=±15V, Ta=25°C, unless otherwise noted.)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Input Offset Voltage V
IO
R
S
≤10kΩ - 0.3 3 mV
Input Offset Current I
IO
- 5 200 nA
Input Bias Current I
B
- 150 1000 nA
Input Resistance R
IN
50 300 - kΩ
Voltage Gain A
V
R
L
≥2kΩ, V
O
=±10V 90 120 - dB
Maximum Output Voltage V
OM
R
L
≥2kΩ ±12 ±13.5 - V
Common Mode Input Voltage V
ICM
±12 ±13.5 - V
Common Mode Rejection Ratio CMR R
S
≤10kΩ 80 110 - dB
Supply Voltage Rejection Ratio SVR R
S
≤10kΩ 80 120 - dB
Slew Rate SR R
L
≥2kΩ - 6 - V/µs
Gain Bandwidth Product1 G
B1
f=10kHz - 27 - MHz
Gain Bandwidth Product2 G
B2
f=100kHz - 19 - MHz
Unity Gain Frequency f
T
V
=1 - 5.5 - MHz
Total Harmonic Distortion THD
V
=20dB, V
O
=5V, R
L
=2kΩ, f=1kHz - 0.001 - %
Equivalent Input Noise Voltage V
NI
FLAT+JIS A, R
S
=300Ω - 0.44 0.56 µV
Supply Current I
CC
- 5 8 mA
■ ELECTRICAL CHARACTERISTICS (D-Rank type(Note2), V
+
/V
-
=±15V, Ta=25°C, unless otherwise noted.)
PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT
Equivalent Input Noise Voltage V
NI
RIAA,R
S
=2.2kΩ - - 1.4 µV
(Note2)D-rank type is a Equivalent Input Noise Voltage selected product. It s only DIP, DMP and SIP package.
■ NOTICE
Oscillation might be caused when capacitor type load were connected. It is recommendable to insert series resistor
(about 50Ω) at the output for preventing oscillation.
