PYG.02 Protective backshell for PY
Note: ABS working temperature: -30°C +90°C.
All dimensions are in millimeters.
2.5 PSU grey
2.5 ABS grey
2.7 ABS grey
2.5 PSU grey
Mat. Colours
ø C
(mm)
PYG.02
PY
•
GMA.1B Bend relief
Part Number
GMA.1B.025.DG
GMA.1B.030.DG
GMA.1B.035.DG
GMA.1B.040.DG
GMA.1B.045.DG
GMA.1B.054.DG
GMA.1B.065.DG
Note: the selection of pigments, which
should remain stable at high temperature, is
limited by the new regulations. For this
reason, some colours will be a shade different
from those used for Desmopan bend reliefs.
The selected solutions represent the best
possible compromise.
2.5 30 2.9 2.5
3.0 30 3.4 3.0
3.5 30 3.9 3.5
4.0 30 4.4 4.0
4.5 30 4.9 4.5
5.4 30 6.0 5.4
6.5 30 7.0 6.5
Dimensions (mm)
Bend relief Cable ø
A L max. min.
-40°C, +80°C –
GMA.1B.025.RG
GMA.1B.030.RG
GMA.1B.035.RG
GMA.1B.040.RG
GMA.1B.045.RG
GMA.1B.051.RG
GMA.1B.057.RG
GMA.1B.063.RG
2.5 34 2.9 2.5
3.0 34 3.4 3.0
3.5 34 3.9 3.5
4.0 34 4.4 4.0
4.5 34 5.0 4.5
5.1 34 5.6 5.1
5.7 34 6.2 5.7
6.3 34 7.0 6.3
A bend relief absorbs the force that may be exerted
on cables.
These are designed for plugs and free sockets with
cable collet and nut.
Desmopan
786
Polyurethane
elastomer
-60°C, +200°C +140°C
Silicone
elastomer
VMQ
Reference
A
B
G
J
M
N
R
S
V
blue
white
grey
yellow
brown
black
red
orange
green
Colours
Note: the last letter «G» of the part number indicates a grey colour, see the adjacent table and
replace letter «G» by the letter of the colour required.
Note: all dimensions are in millimeters
22