https://www.phoenixcontact.com/pi/products/1521478
08/20/2018Page2/4
Connector-SACC-MINFR-3CON-PG 9-1521478
Technical data
General
Insulation resistance ≥ 100 MΩ
Coding A - standard
Status display No
Overvoltage category III
Degree of pollution 3
Connection method Screw connection
Conductor cross section 0.34 mm² ... 1.5 mm² (without ferrule)
0.34 mm² ... 1.5 mm² (with ferrule)
0.34 mm² ... 1.5 mm² (solid)
Conductor cross section AWG 22 ... 16 (without ferrule)
22 ... 16 (with ferrule)
Insertion/withdrawal cycles ≥ 100
Torque 0.8 Nm (7/8" connectors)
0.4 Nm (Screw terminal blocks)
0.8 Nm ... 1 Nm (Pressure screw)
Tightening torque Screw plug insert with sleeve housing as far it will go
Assembly instructions The wires can be connected both with ferrules and without ferrules
The connector pin assignment can be rotated 45° to the cable outlet
Material
Flammability rating according to UL 94 HB
Contact material CuZn
Contact surface material Au
Contact carrier material PUR / PA 6.6
Material of grip body PBT
Material, knurls Zinc die-cast, nickel-plated
Standards and Regulations
Connection in acc. with standard CUL
Flammability rating according to UL 94 HB
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
