4
INDUSTRIAL TEMPERATURE RANGE
IDTQS3VH384
2.5V / 3.3V 10-BIT HIGH BANDWIDTH BUS SWITCH
TYPICAL I
CCD
vs ENABLE FREQUENCY CURVE AT V
CC
= 3.3V
ICCD (mA)
ENABLE FREQUENCY (MHz)
NOTES:
1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
2. Per input driven at the specified level. A and B pins do not contribute to ΔIcc.
3. This parameter is guaranteed but not tested.
4. This parameter represents the current required to switch internal capacitance at the specified frequency. The A and B inputs do not contribute to the Dynamic Power Supply
Current. This parameter is guaranteed but not production tested.
POWER SUPPLY CHARACTERISTICS
Symbol Parameter Test Conditions
(1)
Min. Typ. Max. Unit
ICCQ Quiescent Power Supply Current VCC = Max., VIN = GND or VCC, f = 0 — 2 4 mA
ΔICC Power Supply Current
(2,3)
per Input HIGH VCC = Max., VIN = 3V, f = 0 per Control Input — — 30 μA
ICCD Dynamic Power Supply Current
(4)
VCC = 3.3V, A and B Pins Open, Control Inputs See Typical ICCD vs Enable Frequency graph below
Toggling @ 50% Duty Cycle
0
2
4
6
8
10
12
0 2 4 6 8 10 12 14 16 18 20