Document No. 008-0332-0 Page 1- 2 Rev. C
www.ctscorp.com
Model 425
Surface Mount Quartz Crystal
ORDERING INFORMATION
PACKAGING INFORMATION
[Reference]
Device quantity is 3k pieces per 180mm reel.
13M5537 = 13.553750 MHz 14M3181 = 14.318180 MHz 16M6666 = 16.666670 MHz 28M6363 = 28.636360 MHz
FREQUENCY IN MHz
LOAD CAPACITANCE
K = 8pF
J = 9pF
A = 10pF
L = 12pF
C = 16pF
D = 18pF
E = 20pF
F = 24pF
G = 30pF
S = Series
MODE OF OSCILLATION
F = Fundamental
FREQUENCY TOLERA NCE @ +25° C
1 = ±10ppm
X = ±15ppm
2 = ±20ppm
Y = ±25ppm
3 = ±30ppm
M - indicates MHz and decimal point.
1,2
M425
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
-40°C to +85°C
W = ±15ppm
6 = ±20ppm
7 = ±30ppm
9 = ±50ppm
TEMPERATURE STABILITY/TEMPERATURE RANGE
1. Frequency is recorded with 3 leading digits before the ‘M’ and 4 significant digits after the ‘M’ [including zeros].
[Ex. XXXMXXXX (016M3840), XXXMXXXX (022M1184)]
2] There are frequencies that have significant digits after the 'M' that exceed the 4 digits. The remaining digits will be truncated
from the CTS part number, but the factory will calibrate to the full frequency desired. Ex. P/N Frequency = Actual Frequency
-20°C to +70°C -30°C to +85°C
1 = ±10ppm
X = ±15ppm
2 = ±20ppm
3 = ±30ppm
5 = ±50ppm
R = ±10ppm
Y = ±15ppm
N = ±20ppm
4 = ±30ppm
8 = ±50ppm
FEATURES
Standard 2.5mm x 2.0mm Seam Weld Package
Fundamental Crystal Design
Frequency Range 12 – 60MHz
Frequency Tolerance, ±20ppm Standard
Frequency Stability, ±20ppm Standard
Operating Temperature to -40°C to +85°C
Tape & Reel Packaging Standard, EIA-481
RoHS/Green Compliant [6/6]
APPLICATIONS
Model 425 is a low cost quartz resonator used in a wide range of commercial applications including
wearable and handheld electronics, notebooks, tablets, computer peripherals, Bluetooth, ZigBee and USB interfaces.