2
Technical Data 10390
Effective April 2015
FPV1006 Family
High current power inductors
www.eaton.com/elx
Product Specifications
Part Number
4
OCL
1
(nH) ±10%
I
rms
2
(amps)
I
sat
3
(amps)
DCR (mΩ)
@ 20°C
maximum
FPV1006-85-R 85 25 81 0.41
FPV1006-125-R 125 25 57 0.41
FPV1006-150-R 150 25 45 0.41
1. Open Circuit Inductance (OCL) Test Parameters: 100kHz, 0.1Vrms, 0.0Adc, 25°C
2. I
rms
: DC current for an approximate temperature rise of 40°C without core loss. Derating is necessary for AC currents.
PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the
temperature rise. It is recommended that the temperature of the part not exceed 125°C under worst case operating
conditions verified in the end application.
3. I
sat
: Peak current for approximately 5% rolloff @ +25°C
4. Part Number Definition: FPV1006-xxx-R
FPV1006 = Product code and size
xxx=Inductance value in nH,
-R suffix = RoHS compliant
Note: Hipot: 250Vdc minimum for 2 seconds, conductor to core
Dimensions (mm)
Part marking: FPV1006–xxx, xxx=inductance value in nH,
wwllyy= date code, R=revision level
Tolerances are ±0.25 unless stated otherwise
Soldering surfaces to be coplanar within 0.102 millimeters
DCR measured from point “a” to point “b”
Do not route traces or vias underneath the inductor.
Packaging information (mm)
Supplied in tape and reel packaging, 620 parts per 13” diameter reel
Recommended Pad Layout Schematic
