OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AT29C010A-15JC

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
10
AT29C010A
0394F–FLASH–02/03
Software Data Protection Enable
Algorithm
(1)
Notes: 1. Data Format: I/O7 - I/O0 (Hex); Address Format:
A14 - A0 (Hex).
2. Data Protect state will be activated at end of pro-
gram cycle.
3. Data Protect state will be deactivated at end of pro-
gram period.
4. 128 bytes of data MUST BE loaded.
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA A0
TO
ADDRESS 5555
LOAD DATA
TO
PAGE (128 BYTES)
(4)
WRITES ENABLED
ENTER DATA
PROTECT STATE
(2)
Software Data Protection Disable
Algorithm
(1)
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA 80
TO
ADDRESS 5555
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA 20
TO
ADDRESS 5555
LOAD DATA
TO
PAGE (128 BYTES)
(4)
EXIT DATA
PROTECT STATE
(3)
Software Protected Program Cycle Waveform
(1)(2)(3)
Notes: 1. A7 through A16 must specify the sector address during each high to low transition of WE (or CE) after the software code
has been entered.
2. OE
must be high when WE and CE are both low.
3. All bytes that are not loaded within the sector being programmed will be indeterminate.
11
AT29C010A
0394F–FLASH–02/03
Notes: 1. These parameters are characterized and not 100% tested.
2. See t
OE
spec in AC Read Characteristics.
Data Polling Waveforms
Notes: 1. These parameters are characterized and not 100% tested.
2. See t
OE
spec in AC Read Characteristics.
Toggle Bit Waveforms
(1)(2)(3)
Notes: 1. Toggling either OE or CE or both OE and CE will operate toggle bit.
2. Beginning and ending state of I/O6 will vary.
3. Any address location may be used but the address should not vary.
Data Polling Characteristics
(1)
Symbol Parameter Min Typ Max Units
t
DH
Data Hold Time 10 ns
t
OEH
OE Hold Time 10 ns
t
OE
OE to Output Delay
(2)
ns
t
WR
Write Recovery Time 0 ns
Toggle Bit Characteristics
(1)
Symbol Parameter Min Typ Max Units
t
DH
Data Hold Time 10 ns
t
OEH
OE Hold Time 10 ns
t
OE
OE to Output Delay
(2)
ns
t
OEHP
OE High Pulse 150 ns
t
WR
Write Recovery Time 0 ns
12
AT29C010A
0394F–FLASH–02/03
Software Product Identification
Entry
(1)
Software Product Identification Exit
(1)
Notes: 1. Data Format: I/O7 - I/O0 (Hex); Address Format:
A14 - A0 (Hex).
2. A1 - A15 = V
IL
.
Manufacturer Code is read for A0 = V
IL
; Device
Code is read for A0 = V
IH
.
3. The device does not remain in identification mode
if powered down.
4. The device returns to standard operation mode.
5. Manufacturer Code is 1F. The Device Code is D5.
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA 90
TO
ADDRESS 5555
PAUSE 10 mS ENTER PRODUCT
IDENTIFICATION
MODE
(2)(3)(5)
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA F0
TO
ADDRESS 5555
PAUSE 10 mS EXIT PRODUCT
IDENTIFICATION
MODE
(4)
Boot Block Lockout Feature Enable
Algorithm
(1)
Notes: 1. Data Format: I/O7 - I/O0 (Hex); Address Format:
A14 - A0 (Hex).
2. Lockout feature set on lower address boot block.
3. Lockout feature set on higher address boot block.
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA 80
TO
ADDRESS 5555
LOAD DATA AA
TO
ADDRESS 5555
LOAD DATA 55
TO
ADDRESS 2AAA
LOAD DATA 40
TO
ADDRESS 5555
LOAD DATA 00
TO
ADDRESS 00000H
(2)
PAUSE 20 mS
LOAD DATA FF
TO
ADDRESS 1FFFFH
(3)
PAUSE 20 mS
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

AT29C010A-15JC

Mfr. #:
Buy AT29C010A-15JC
Manufacturer:
Microchip Technology / Atmel
Description:
NOR Flash 1M (128kx8) NRND
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet