6 Safety and Productivity Solutions
RDSC Series.
Features: Train detection without track
circuits • Zero speed and bi-directional
sensing • Duplex microprocessor system
• Relay outputs • Solid state technology
• RS 232 diagnostic output • Detects
standard rail wheels up to speeds of 281
mph • Connecting wires may be up to 2
miles only (>10,000 ft.) • Sealing to IP 68
Benets: Enhanced reliability. Robust
design. Designed to provide fail-safe train
depart output. Interfaces with existing
crossing controls. Quick installation.
Allows proactive maintenance and fault
monitoring. Resistant to shock and
vibration. Wide temperature range. Polarity
independent – voltage may be reversed
and sensor still works. Short circuit,
overvoltage, and transient protection.
Greatly reduces problems with leaves,
rust, snow, salt, grit, dust, and oil on rails.
Designed for use in potential reversing
train applications.
100 FW Series.
Features: All metal sensing • Shielded
3-wire dc sinking (NPN) • Small housing
• Stainless steel • High level of electronics
protection • Leadwire or connector
termination
Benets: Enhanced reliability. Environment-
proof, self-contained. Enclosed in a rugged
hermetically sealed stainless steel housing.
Designed to meet the requirements of
aerospace, ordnance, marine, mass
transit, and high performance industrial
equipment. Potential applications include
aircraft landing gear, gun turret position
control, and door and hatch open/closed
monitoring.
200 FW Series.
Features: Hall-effect, magnetic field
sensitive • High frequency switching
• Shielded 3-wire dc sinking (NPN)
• Small housing • Stainless steel • High
level of electronics protection • Leadwire
or connector termination
Benets: Enhanced reliability.
Environment-proof, self-contained.
Enclosed in a rugged hermetically sealed
stainless steel housing. Designed to
meet the requirements of aerospace,
ordnance, marine, mass transit, and
high performance industrial equipment.
Potential applications include aircraft
landing gear, gun turret position control,
and door and hatch open/closed
monitoring.
300 FW Series.
Features: Ferrous metal sensing
• Two-piece construction – stainless
steel bushing or flange mount sensors
and plug-in electronics card • Small
size housing • Stainless steel • Reverse
polarity • Designed to work in conjunction
with Honeywell Sensor Interface Card (405
FW Series) or Sensor Interface Module
(ZS-00380 Series)
Benets: The combined sensor and
interface system offer highly enhanced
reliability. Mean time between failure in
excess of 500K hours when used with
the Sensor Interface Module (ZS-00380
Series). Sensitive electronics on plug-in
card for inside mounting. Enclosed in
a rugged hermetically sealed stainless
steel housing. Designed to withstand
temperature extremes and exposure to
salt, humidity, sand, dust, and corrosive
fluids such as skydrol and typical aircraft
fuels. Potential applications include aircraft
landing gear, flight control surfaces, and
aircraft door monitoring.
21 FW Series.
Features: Hall-effect, magnetic field
sensitive • Single channel • 3-wire dc
• Small housing • Stainless steel
Benets: Enhanced reliability. Small
profile. Enhanced resistance to
electromagnetic interference. Competitive
cost. Often ideal for many locations on
an aircraft, or potential applications with
severe shock, vibration, temperature, and
EMI environments. Potential applications
include door and utility systems, high
lift systems, hydraulic systems, valves,
engine/thrust reverser systems, power
generation systems, environmental control
systems, aircraft landing gear, gun turret
position control, and door and hatch open/
closed monitoring.
23 FW Series.
Features: Hall-effect, magnetic field
sensitive • Triple channel • 9-wire dc
• Small housing • Stainless steel
Benets: Enhanced reliability. Small profile.
Enhanced resistance to electromagnetic
interference. Competitive cost. Often
ideal for many locations on an aircraft, or
applications with severe shock, vibration,
temperature, and EMI environments.
Potential applications include door and
utility systems, high lift systems, hydraulic
systems, valves, engine/thrust reverser
systems, power generation systems,
environmental control systems, aircraft
landing gear, gun turret position control, and
door and hatch open/closed monitoring.
5 FW Series.
Features: Hall-effect, magnetic field
sensitive • Small housing • Stainless steel
Benets: Enhanced reliability. Small
profile. Enhanced resistance to
electromagnetic interference. Competitive
cost. Often ideal for many locations on
an aircraft, or applications with severe
shock, vibration, temperature, and EMI
environments. Potential applications
include door and utility systems, high
lift systems, hydraulic systems, valves,
engine/thrust reverser systems, power
generation systems, environmental control
systems, aircraft landing gear, gun turret
position control, and door and hatch open/
closed monitoring.
922AA2Y-A6P-Z722A.
Features: All metal sensing • Stainless
steel • Small housing • High frequency
switching • High level of electronics
protection • Leadwire or connector
termination
Benets: Environment-proof. Self-
contained. Operation by the Eddy Current
Killed Oscillator (ECKO) principle to
detect metallic objects passing in front of
the sensing face. Designed to meet the
requirements of aerospace, ordnance,
marine, and mass transit and high
performance industrial equipment. Potential
applications include aircraft landing gear,
gun turret position control, and door and
hatch open/closed monitoring.
