FSA646
www.onsemi.com
4
ABSOLUTE MAXIMUM RATINGS
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage −0.5 6.0 V
V
CNTRL
DC Input Voltage (/OE, SEL) (Note 1) −0.5 V
CC
V
V
SW
DC Switch I/O Voltage (Note 1,2) −0.3 1.8 V
I
IK
DC Input Diode Current −50 mA
I
OUT
DC Output Current 25 mA
T
STG
Storage Temperature −65 +150 °C
ESD
Human Body Model, JEDEC: JESD22−A114 All Pins 2.0
kV
Charged Device Model, JEDEC: JESD22−C101 1.0
IEC 61000−4−2 System
Contact 8.0
Air Gap 15.0
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
2. V
SW
refers to analog data switch paths.
RECOMMENDED OPERATING CONDITIONS
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 1.5 5.0 V
V
CNTRL
Control Input Voltage (SEL, /OE) (Note 3) 0 V
CC
V
V
SW
Switch I/O Voltage
(CLKn, Dn, CLKAn, CLKBn, Dan, DBn)
−HS Mode 0 0.3 V
−LS Mode 0 1.3 V
T
A
Operating Temperature −40 +85 °C
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
3. The control inputs must be held HIGH or LOW; they must no float.
DC AND TRANSIENT CHARACTERISTICS (T
A
= 25°C unless otherwise specified)
Symbol Parameter Conditions V
CC
(V)
T
A
= −40 to +855C
Unit
Min. Typ. Max.
V
IK
Clamp Diode Voltage
(/OE, SEL)
I
IN
= −18 mA 1.5 −1.2 −0.6 V
V
IH
Input Voltage High SEL, /OE 1.5 to 5 1.3 V
V
IL
Input Voltage Low SEL, /OE 1.5 to 5 0.5 V
I
IN
Control Input Leakage
(/OE, SEL)
V
CNTRL
= 0 to V
CC
5 −0.5 0.5
mA
I
NO(OFF)
I
NC(OFF)
Off Leakage Current of
Port CLKAn, Dan, CLKBn
and DBn
V
SW
= 0.0 ≤ DATA ≤ 1.3 V 5 −0.5 0.5
mA
I
A(ON)
ON Leakage Current of
Common Ports (CLKn,
Dn)
V
SW
= 0.0 ≤ DATA ≤ 1.3 V 5 −0.5 0.5
mA
I
OFF
Power−Off Leakage
Current (All I/O Ports)
V
SW
= 0.0 or 1.3 V 0 −0.5 0.5
mA
I
OZ
Off−State Leakage V
SW
= 0.0 ≤ DATA ≤ 1.3 V
/OE = High
5 −0.5 0.5
mA