Innovative Technology
for a Connected World
Tflex
TM
SF600 Series
Thermal Gap Filler
THR-DS-Tex-SF600 0412
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specications are subject to change without notice. Responsibility
for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the tness, merchantability, suitability or non-
infringement of any Laird Technologies materials or products for any specic or general uses. Laird Technologies shall not be liable for incidental or consequential damages of
any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished
upon request. © Copyright 2012 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or
registered trade marks of Laird Technologies, Inc. or an afliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a
license under any Laird Technologies or any third party intellectual property rights. Document A16509-00 Rev A, 04/18/12.
STANDARD THICKNESSES
Standard thickness is 0.010-inch (0.25 mm) through 0.140-inch (3.56 mm) and available in 0.010-inch (0.25 mm) increments. 0.010-inch is only
available in custom cut parts (sheet material is not available).
MATERIAL NAME AND THICKNESS
Tex™ indicates Laird Technologies’ brand thermally conductive elastomeric gap ller product. SF6xx indicates ‘SF600 series’
3.0 W/mK material, and xxx indicates thickness in mils (0.001-inches)
Examples:
Tex™ SF620 = 0.020-inch thick material
Tex
TM
SF600 TEST METHOD
Construction
Boron Nitride lled
gap pad
NA
Color Rose visual
Thermal Conductivity 3.0 W/mK Hot Disk
Hardness (Shore 00)
80 Shore 00;
3 seconds
ASTM D2240
Density 1.27 g/cc
Helium
Pyncometer
Standard Thickness Range
0.010 - 0.140 inches
(0.25 - 3.56 mm)
Volume Resistivity 10
14
ohm-cm ASTM D257
UL Flammability Rating V0 (pending) UL 94
Continuous use temperature -20° to 125°C TGA
Weight Loss at 125°C <0.1% over 24 hrs TGA
Dielectric Constant @ 1 kHz 3.5 ASTM D150
Tflex
TM
SF600 TYPICAL PROPERTIES
0.00%
10.00%
20.00%
30.00%
40.00%
50.00%
60.00%
70.00%
80.00%
90.00%
100.00%
0102030405060708090100 110
Deflection
Tflex SF600 Deflection (70 mil +)
Tflex SF670
Tflex SF680
Tflex SF690
Tflex SF6100
Tflex SF6110
Tflex SF6120
Tflex SF6130
Tflex SF6140
