B88069X6980C203

Surge Arrester
3-Electrode-Arrester
Series/Type:
Ordering code:
T60-A420X
B88069X6980C203
Date:
23.05.2002
Version:
01
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
Important notes
The following applies to all products named in this publication:
1.
Some parts of this publication contain statements about the suitability of our pr
oducts for
certain areas of appl
ication. These statements are based on our knowled
ge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a
rule, EPCOS is either
unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular custom
er application.
2.
We also point out that in individual cases, a malfunction of electronic components or fail
ure
before the end of their usual servi
ce life cannot be completely ruled out in the
current state
of the art, even if the
y are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitr
y
or redundancy) that no injury or damage is su
stained by third parties in the event of malfunction or
failure of an electronic
component.
3.
The warnings, cautions and product-specific notes must be observed.
4.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication ma
y change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when
you place an order.
We also
reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Produ
cts and Services in the Electrical Industry
published b
y the German Electrical and Electronics Industry Association (ZVEI)
.
7.
The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, ExoCore, FilterCap, FormFit, LeaX
ield, MiniBlue, MiniCell,
MKD,
MKK, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiC
ap, PQSine, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic,
SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countri
es.
Further infor
mation will be found on the Internet at www.epc
os.com/trademarks.
Surge Arrester T60-A420X
3-Electrode-Arrester Ordering code: B88069X6980C203
AB E / AB PM Issue 01, 23.05.2002
Page 1 of 2
DC spark-over voltage
1) 2) 3)
at 100 V/s
at 100 kV/s
330 ... 600
350 ... 620
V
V
Impulse spark-over voltage
3)
at 1 kV/µs - for 99 % of measured values 350 … 850 V
Insulation resistance at 100 V
dc
3)
>10
G
Capacitance at 1 MHz
3)
<1.5 pF
Service life
8)
300 operations 10/1000
µ
s
,
alternatin
g
polarit
y
4)
400 A
300 operations 10/1000
µ
s
,
alternatin
g
polarit
y
5)
200 A
10 operations 8/20
µ
s
4)
20 kA
10 operations 8/20
µ
s
5)
10 kA
20 operations 50 Hz; 1 s
4) 6)
20 A
rms
20 operations 50 Hz; 1 s
5) 6)
10 A
rms
200 operations 50 Hz; 1 s
5) 7)
1A
rms
DC holdover voltage
8)
at 80 V
dc
/ 600
at 120 V
dc
/600
< 150
< 150
ms
ms
Weight ~ 3.0 g
Operation and storage temperature -40 ... +90 °C
Climatic category (IEC 60068-1) 40/ 90/ 21
Marking, blue
420 YY O
420 - Nominal voltage
YY - Year of production
O-Nonradioactive
1)
At delivery AQL 0.65 level II, DIN ISO 2859
2)
In ionized mode
3)
Tip or ring electrode to center electrode
4)
Total current through center electrode, half value through
tip respectively ring electrode
5)
Total current through center electrode, same value through
tip respectively ring electrode
6)
Test program: 10 times (1 s current, 2 s break, 1 s current) 6 min break
7)
Test program: 100 times (1 s current, 2 s break, 1 s current) 6 min break
8)
Test in accordance with CNET; STC 93-6513 (24.07.90)

B88069X6980C203

Mfr. #:
Manufacturer:
EPCOS / TDK
Description:
Gas Discharge Tubes / Gas Plasma Arrestors T60-A420X
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet