MPC603RRX266LC

Application-SpeciÞc Information
PID7v-603e Apple-Only Data Sheet
PowerPC
603e
ª
RISC Microprocessor Family:
MPC603r (Goldeneye) Part Number SpeciÞcation
This document deÞnes a unique part number for a PowerPCª PID7t-603e microprocessor manufactured by Motorola as part
number MPC603R or EC603R. It describes changes to recommended operating conditions and revised electrical speciÞcations, as
applicable, from those described in the
PowerPC 603e RISC Microprocessor Family: MPC603r Hardware SpeciÞcations
.
SpeciÞcations provided in this data sheet supercede those in the
MPC603r Hardware SpeciÞcations
(order #: MPC603REC/D);
speciÞcations not addressed herein are unchanged.
Note that headings and tables in this data sheet are not numbered; however, they are intended to correspond directly to the heading
or table affected in the general hardware speciÞcations. Any additional information (including tables) not included in the hardware
speciÞcation are noted.
Part numbers addressed in this document and a summary of their differences from the general speciÞcation are listed in the
following table. For more detailed ordering infomation see ÒOrdering Information for the PID7t-603e Microprocessor".
Feature Changes
This section summarizes signiÞcant feature changes between the revision of the PID7t-603e addressed by this document and the
previous revision 1.0 (XPC603RRXnnnLA or XPC603RFEnnnLA where nnn is the core frequency).
This revision was for manufacturing improvements only; there are no functional differences between this revision 2.1 and the
previous revision 1.0.
This revision is functionally equivalent to the PID7v-603e (Valiant) microprocessor Revision 2.1 (XPC603PFEnnnLE/
XPC603PRXnnnLE) including the following errata.
Errata
This section summarizes design defects or errors (errata) that are known to exist on this revision of the PID7t-603e. There may be
additional errata that are not known or are not yet documented here which may cause the part to deviate from the functional
description provided in the
MPC603e & EC603eª RISC Microprocessor UserÕs Manual
(order # MPC603EUM/AD Rev 1). Refer
to the website at http://www.mot.com/SPS/PowerPC/ for the latest version of this Part Number SpeciÞcation or to your local
Motorola sales ofÞce for later and/or more detailed description of the errata.
. Part Numbers Addressed by this Data Sheet
Motorola Part Number
Operating Conditions
SigniÞcant Differences
CPU Frequency Vdd T
J
(
°
C)
MPC603RRX166LC 166 MHz 2.5
±
5%V 0 to 105 No electrical speciÞcation changes.
MPC603RRX200LC 200 MHz 2.5
±
5%V 0 to 105 No electrical speciÞcation changes.
MPC603RRX233LC 233 MHz 2.5
±
5%V 0 to 105 No electrical speciÞcation changes.
MPC603RRX266LC 266 MHz 2.5
±
5%V 0 to 105 No electrical speciÞcation changes.
MPC603RRX300LC 300 MHz 2.5
±
5%V 0 to 105 No electrical speciÞcation changes.
MPE603RRX166LC 166 MHz 2.5
±
5%V 0 to 105 No spec changes. Floating point not guaranteed.
MPE603RRX200LC 200 MHz 2.5
±
5%V 0 to 105 No spec changes. Floating point not guaranteed.
MPE603RRX233LC 233 MHz 2.5
±
5%V 0 to 105 No spec changes. Floating point not guaranteed.
MPE603RRX266LC 266 MHz 2.5
±
5%V 0 to 105 No spec changes. Floating point not guaranteed.
MPE603RRX300LC 300 MHz 2.5
±
5%V 0 to 105 No spec changes. Floating point not guaranteed.
MPC603RRX200TC 200 MHz 2.5
±
5%V -40 to 105 Extended temperature range.
MPC603RRX266TC 266 MHz 2.5
±
5%V -40 to 105 Extended temperature range.
Motorola Part Numbers Affected:
MPE603RRX166LC MPC603RRX166LC
MPE603RRX200LC MPC603RRX200LC
MPE603RRX233LC MPC603RRX233LC
MPE603RRX266LC MPC603RRX266LC
MPE603RRX300LC MPC603RRX300LC
MPC603RRX200TC
MPC603RRX266TC
MPC603r_C PNS 980612
A
R
C
H
I
V
E
D
B
Y
F
R
E
E
S
C
A
L
E SE
M
I
C
O
N
D
U
C
T
O
R
,
I
N
C
.
Freescale Semiconductor, Inc.
2 PID7v-603e Specification Variances
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
The known errata as of the date of this document are summarized below.
Electrical and Thermal Characteristics
This section provides any changes to the AC and DC electrical speciÞcations and thermal characteristics for the PID6-603e parts
described herein.
DC Electrical Characteristics
This section describes the changed thermal operating conditions for the PID7t-603e part numbers described herein.
# Problem Description Impact Solutions
1 Snoop copyback causes dcbi to
broadcast wrong address.
A snoop which causes a copy-
back and occurs in a one cycle
window near a dcbi causes the
dcbi to broadcast the address
of the snoop copyback.
Only systems using both soft-
ware and hardware coherency
simultaneously.
Use software semaphores
rather than rely on dcbi to
invalidate cache lines shared
across multiple processors.
2 Competition for reservation
with lwarx/stwcx may cause
live-lock
The problem occurs when two
processors are competing on
the bus for a reservation, and
the bus is operating with
address pipelining
System Hang Insert a bus clockÕs worth of
no-ops before lwarx
3 Touch load causes incorrect
address to appear on memory
bus
A touch load (dcbt) preceded
by an instruction that generates
an exception causes a random
address to appear on the mem-
ory bus
Systems issuing instructions
which generate mmu excep-
tions one cycle before using a
touch load instruction
Disable touch loads with
NOOPTI bit in HID0.
4 Write-thru stores followed by
dcbz followed by a snoop, all
to the same cache line, may
cause incoherency.
The sequence of write-thru
stores followed by dcbz fol-
lowed by a snoop, all to the
same cache line, may cause
incoherency.
The write-thru store is com-
pleted after the dcbz.
Store zeroes rather than rely on
dcbz to zero cache lines in
areas of memory that are
marked as write-thru and can
be accessed via multiple logi-
cal addresses.
5 The broadcasting of dcbz
instructions may retry snoop
accesses indeÞnately.
A sequence of broadcast bcbz
instructions may retry snoop
accesses indeÞnately.
Snoop originator may timeout. Disable broadcasting of dcbz
by marking the memory space
being addressed by the dcbz
instruction as not global in the
BAT or PTE.
. Recommended Operating Conditions
Characteristic Symbol Value Unit Notes
Junction temperature T
J
-40 to 105
°
C
Note: 1. Parts with TC sufÞx only.
A
R
C
H
I
V
E
D
B
Y
F
R
E
E
S
C
A
L
E SE
M
I
C
O
N
D
U
C
T
O
R
,
I
N
C
.
Freescale Semiconductor, Inc.
Ordering Information
The following table provides the ordering information for the PID7t-603e part numbers described herein.
Part Marking
This section provides information on Motorola device marking standards. Parts are marked as the example shown below.
Part Marking for BGA Devices
Ordering Information for the PID7t-603e Microprocessor
Package Type
Device
Rev
Process Mask Code
CPU
Frequency
(MHz)
Motorola
Part Number
255
CBGA
2.1 PPC3.0 2H93J 166 MPC603RRX166LC
200 MPC603RRX200LC
233 MPC603RRX233LC
266 MPC603RRX266LC
300 MPC603RRX300LC
166 MPE603RRX166LC
200 MPE603RRX200LC
233 MPE603RRX233LC
266 MPE603RRX266LC
300 MPE603RRX300LC
200 MPC603RRX200TC
266 MPC603RRX266TC
mm
mm
MPC603RRX200LC
MMMMMM ATWLYYWWA
BGA
Notes:
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
MMMMMM is the 6-digit mask number
ATWLYYWWA is the traceability code
A
R
C
H
I
V
E
D
B
Y
F
R
E
E
S
C
A
L
E SE
M
I
C
O
N
D
U
C
T
O
R
,
I
N
C
.
Freescale Semiconductor, Inc.
Information in this document is provided solely to enable system and software
implementers to use Freescale Semiconductor products. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
Freescale Semiconductor reserves the right to make changes without further notice to
any products herein. Freescale Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does
Freescale Semiconductor assume any liability arising out of the application or use of
any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters which may be
provided in Freescale Semiconductor data sheets and/or specifications can and do
vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by
customer’s technical experts. Freescale Semiconductor does not convey any license
under its patent rights nor the rights of others. Freescale Semiconductor products are
not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life,
or for any other application in which the failure of the Freescale Semiconductor product
could create a situation where personal injury or death may occur. Should Buyer
purchase or use Freescale Semiconductor products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all
claims, costs, damages, and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Freescale
Semiconductor was negligent regarding the design or manufacture of the part.
RoHS-compliant and/or Pb- free versions of Freescale products have the functionality
and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free
counterparts. For further information, see http://www.freescale.com or contact your
Freescale sales representative.
For information on Freescale.s Environmental Products program, go to
http://www.freescale.com/epp.

MPC603RRX266LC

Mfr. #:
Manufacturer:
NXP / Freescale
Description:
Microprocessors - MPU 603R REV2.1 HIP3.0
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union